FRP Fan Farm Industrial Exhaust Fan

Advantage:
1.High toughness and strength: material is UV resistant glass fiber and resin. Strong corrosion resistance, color will not fade.
2.High efficiency and low consumption: Blade is professional design, strong and tough.
3.Prevent air back flow, prevent flies and insects: Synthetic PVC shutters using the principle of air flow.
4.Easy maintain: the blade assemble is connected with motor directly, no belt transmission.

frame

Anti-aging, high corrosion resistance, smooth surface, strong and durable

Motor

Customized silicon steel 10-grade motor, low noise, large air volume, low failure rate, high-strength motor bracket, effectively reducing noise

Fan blade

The fiberglass fan blades are integrally formed to discharge the resonance produced by the metal combination; they are acid and alkali resistant, quiet, run smoothly, have low wind resistance, and have a large exhaust volume.

Shutters

The shutters are dustproof, rainproof, beautiful and generous. They open and close automatically based on the air flow principle, and do not require electricity or personnel to close.

Frame

Acid and alkali resistant, corrosion resistant, rust-free, UV resistant, impact resistant, aging resistant, high density, high strength, long service life

Wind duct

You can choose to install an optional fan to improve efficiency and increase air volume

1, Suitable for high temperature & smelly workshop: such as heat treatment plant, casting plant, plastics plant, aluminum factories, shoe factories, leather factory, electroplating plants, a variety of chemical plants.
2, Suitable for labor-intensive enterprises: such as garment factories, all kinds of assembly workshops, cafes.
3, Suitable for greenhouse, livestock farms, poultry house.
4, Especially for the need to cool down and need some humidity locations. Such as cotton mills, woolen mills, jute mills, weaving plants, chemical plants, knitting factory, silk factory, hosiery and other textile mill
5, Suitable for warehousing logistics.

Hebei Richange FRP Products Co., Ltd. was established in August 2013 and is located at Weisan Road, High-tech Development Zone, Jizhou District, Hengshui City. It is a technology-based enterprise integrating product research and development, design, production, sales, installation and after-sales service.

Our products are mainly divided into three categories: winding products,molded products,and pultruded products. The winding products are FRP pipe, FRP storage tank, FRP winding septic tank.  The molded products are mainly septic tank,FRP molded grating, fiberglass flower pot, trench cover, manhole cover and manhole  grate,water channel .The pultruded products are FRP cable tray, FRP pultrusion profiles( such as square/ round tube, round rod, I-beam,angle),stair steps, ladders. 

The company currently has 10 (braided, wound and pultruded) pipe production lines. There are 12 tank spray lining production lines, 2 tank winding production lines, 1 integrated pump station production line, and 2 large molding machines. There are 3 small molding machines and 3 sheet production lines.

1. Are you a manufacturer?
Yes, we are a manufacturer, welcome to visit our factory!

2. What's FRP?
Fiber Reinforced Polymer (FRP) is a composite material made of a polymer matrix reinforced with fibers. The fibres are usually glass, carbon, aramid, or basalt. Rarely, other fibres such as paper or wood or asbestos have been used. The polymer is usually an epoxy, vinylester or polyester thermosetting plastic, and formaldehyde resins are still in use. FRP are commonly used in the aerospace, automotive, marine, construction industries and ballistic armor.

3.How can you guarantee you product quality?
100% of our products will be tested before delivery. To control quality, we are using high quality material from high quality supplier.