Audited Supplier
customized profile
FRP
Transparent Plastic Sheet
0.1%~0.3%
＜0.4%
81~130MPa
1.0mm-2.0mm
Customized
Customized
TOPRISE
Pallet
customized
China
3920620009
Product Description
Product Name | Fiberglass Skylight Roofing Sheet |
Resin Ingredient | Advanced benzene-----new neopentyl glycol anti-ageing DTM-1 resin. |
Surface Treatment | Surface applying Morplated anti-ageing glue (80 µm thickness or so) and pastes Melinex 301. |
Glass Fiber | Adopting Taian high- quality glass fiber, the content no less than 30%. |
Unit Weight | 1800g/m² 2400g/m² 3050g/m² |
Nominal Thickness | 1.2mm 1.5mm 2.0mm |
Heat Resistance Limit | -60 to +130 |
Light Transmittance | 75%±2% ( light green) 53%±2% (cream white) |
Anti- ultraviolet Rate | 99.9% |
Tensile Strength | 100Mpa |
Flexural Strength | 180Mpa |
Cracking Elongation Rate | 1.9% |
Barcol Hardness | ≥50 |
Thermal Expansion Coefficient | 2.2×10¯5cm/cm/ |
Thermal Conductivity | 0.18w/m° k |
Warranty | 10 years |
* Good No cracking phenomenon when driving nails in roof installation
* Having close combining with color steel plate. Cross- section thickness is uniform. The shape of FRP sheet is consistent with steel plate.
* Transmittance loss rate is low. No yellowing phenomenon after long term service.
* Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold.
* Light through FRP sheet assumes scattering shape and gentle.
* Bright and clean appearance, no distinct air bubble and cracking on FRP sheet.
* Anti- ultraviolet and anti- chemistry corrosion.
* Anti- ageing and anti- pulverization.
* Long service life.
Q: Could you customize the size?
A: We have standard thickness. We can customize the width, color and length. The length shall be less than the container length.
We need you to send roof profile drawing to us.
Q: What's your MOQ?
A: 500 meters.
Q: Could you recommend the model and quantity?
A: Yes, we can design the model and quantity as per the warehouse dimension and warehouse type.
Q:How about the lead time?
A: Normally 2 weeks. It depends on the quantity and our production plan.
