Audited Supplier
FRP corners have extremely high resistance, suitable for various high and low temperature environments, corrosion-resistant and sun resistant, lightweight, easy to transport and install, and strong flame retardancy.
FRP corner wrapping is commonly used for connecting board corners, building materials, garden fences, corner decoration, edge protection, door and window protection, and packaging with corner protectors.
| No | Model | Angle | Thickness(mm) | Length(mm) | Length(mm) | Meter/weight(m/kg) | Colour | Other |
| 1 | L-50x50 | 90° | 2.5 | 50 | 50 | 0.5 | Customized | |
| 2 | L-70x70 | 90° | 2 | 70 | 70 | 0.63 | Customized | |
| 3 | L-70x110 | 90° | 2 | 70 | 110 | 0.75 | Customized | |
| 4 | L-80x80 | 90° | 2 | 80 | 80 | 0.77 | Customized | |
| 5 | L-120x120 | 90° | 2.5 | 120 | 120 | 1.2 | Customized | |
| 6 | L-75x100 | 90° | 9.52 | 75 | 100 | 2.98 | Customized | |
| 7 | L-AxB | Customized | Customized | Customized | Customized | Customized | Customized |
FRP Pultrusion production is a continous production process to produce fiberglass reinforcedpolymer proflesof any length and contstant section.Reinforce-ment fibers may be roving,con.tinous mat,woven robing,carbonor others. The fibers are impregnated with polymer matrix(resin,minerals,pigments,additives) and passedthrough a pre-foming station that producesthe stratifcation necessary to give the profle the desiredproperties.After the pre-formingstep,the resin-impregnated fibers are pulled through a heated die topolymerize the resin.
1. Are you a manufacturer?
Yes, we are a manufacturer, welcome to visit our factory!
2. What's FRP?
Fiber Reinforced Polymer (FRP) is a composite material made of a polymer matrix reinforced with fibers. The fibres are usually glass, carbon, aramid, or basalt. Rarely, other fibres such as paper or wood or asbestos have been used. The polymer is usually an epoxy, vinylester or polyester thermosetting plastic, and formaldehyde resins are still in use. FRP are commonly used in the aerospace, automotive, marine, construction industries and ballistic armor.
If you already have your own design drawings, it will take up to 15 working days for our company to make the mold based on your design drawings and produce the first sample; If you do not have your own design drawings, our company can provide you with a maximum of 2 working days for the first drawing and a maximum of 25 working days for the first sample according to your requirements
