Audited Supplier
customized
Smooth
Different Colors Can Be Achieved.
About 2.5mm
Industral
FRP Channel
Pultrusion
FRP
GFRP
Polyester FRP
Resin, Fiberglass, Agents, etc.
Smooth or Sanded. According to Customer Needs.
Themosetting Plastic Products
JLF
Pallet, Plastic Bag, Carton, etc.
customized
Nanjing, China
3926909090
Product Description
1. Properties of FRP pultruded profiles
A. High strength
FRP is stronger than structural steel on a pound-for pound basis. It has been used to buildings, walkway, sub-floors and platforms.
B. Light weight
FRP is 20-25% the weight of steel and 70% the weight of aluminum. FRP are easily transported, handled and lifted into place. Total structures can often be preassembled and shipped to the job site ready to installation.
C. Anti-corrosion
FRP will not rot and are impervious to a broad range of corrosive elements. This feature makes FRP a natural selection for indoor or outdoor structures in pulp and paper mills, chemical plants, water and sewage treatment plants, structural near salt water and other corrosive environments.
D. Electro-magnetic transparency
FRP are transparent to radio waves, microwaves and other electromagnetic. It is widely used to make antennas.
E. Non-conductive
FRP has low thermal/ electrical conductivity.
F. Dimensional stability
The coefficient of thermal expansion of FRP is slightly less than steel and significantly less than aluminum.
G. Aesthetics
FRP are pigmented throughout the thickness of the part and can be made to virtually any desired custom color. Special surfacing veils are also available to create special surface appearances such as wood grain, marble, granite, etc.
2. Craft and Raw Materials
FRP pultruded channel are manufactured with the pultrusion process after choosing the correct raw materials major including the resin, fibers and additives according to the profiles requirement including mechanical strength, electrical insulation, anti-corrosion etc.
3. Applications
FRP pultruded channel beam can meet the customer's requirements by using different combination of resin, fibers and others.
FRP pultruded channel beam offer a unique combination of chemical resistance, size stability, high strength, and thermal/electric non-conductivity, etc.
FRP pultruded channel can be used for structural shapes, such as the ladder frame, filler bracket, and hand rail.
4. There is a pictures of some FRP Channels that produced in our factory.
5. Some normal sizes of FRP Channels are as follows.
(Pls note special sizes are also welcomed.)
6. Following is General Physical Parameters of FRP Pultruded Profiles.(If have special requirements, pls contact Nanjing Jinglue.)
LW-lengthwise CW-crosswise PE=perpendicular to laminate face
A. High strength
FRP is stronger than structural steel on a pound-for pound basis. It has been used to buildings, walkway, sub-floors and platforms.
B. Light weight
FRP is 20-25% the weight of steel and 70% the weight of aluminum. FRP are easily transported, handled and lifted into place. Total structures can often be preassembled and shipped to the job site ready to installation.
C. Anti-corrosion
FRP will not rot and are impervious to a broad range of corrosive elements. This feature makes FRP a natural selection for indoor or outdoor structures in pulp and paper mills, chemical plants, water and sewage treatment plants, structural near salt water and other corrosive environments.
D. Electro-magnetic transparency
FRP are transparent to radio waves, microwaves and other electromagnetic. It is widely used to make antennas.
E. Non-conductive
FRP has low thermal/ electrical conductivity.
F. Dimensional stability
The coefficient of thermal expansion of FRP is slightly less than steel and significantly less than aluminum.
G. Aesthetics
FRP are pigmented throughout the thickness of the part and can be made to virtually any desired custom color. Special surfacing veils are also available to create special surface appearances such as wood grain, marble, granite, etc.
2. Craft and Raw Materials
FRP pultruded channel are manufactured with the pultrusion process after choosing the correct raw materials major including the resin, fibers and additives according to the profiles requirement including mechanical strength, electrical insulation, anti-corrosion etc.
3. Applications
FRP pultruded channel beam can meet the customer's requirements by using different combination of resin, fibers and others.
FRP pultruded channel beam offer a unique combination of chemical resistance, size stability, high strength, and thermal/electric non-conductivity, etc.
FRP pultruded channel can be used for structural shapes, such as the ladder frame, filler bracket, and hand rail.
4. There is a pictures of some FRP Channels that produced in our factory.
5. Some normal sizes of FRP Channels are as follows.
(Pls note special sizes are also welcomed.)
6. Following is General Physical Parameters of FRP Pultruded Profiles.(If have special requirements, pls contact Nanjing Jinglue.)
LW-lengthwise CW-crosswise PE=perpendicular to laminate face
| Mechanical performance | Value | Units | Test method | ||||||
| Tensile strength | LW | 230-600 | Mpa | ASTM D-638 | |||||
| CW | 45-80 | ||||||||
| Tensile modulus | LW | 18-30 | Gpa | ASTM D-638 | |||||
| CW | 7-13 | ||||||||
| Flexural strength | LW | 300-700 | Mpa | ASTM D-790 | |||||
| CW | 80-120 | ||||||||
| Flexural modulus | LW | 20-26 | Gpa | ASTM D-790 | |||||
| CW | 7-12 | ||||||||
| Compressive strength | LW | 280 | Mpa | ASTM D-695 | |||||
| CW | 105 | ||||||||
| Compressive modulus | LW | 21 | Gpa | ASTM D-695 | |||||
| CW | 7.9 | ||||||||
| Interlayer shear strength | LW | 25 | Mpa | ASTM D-2344 | |||||
| Impact strength | 280 | KJ/M2 | ASTM D-256 | ||||||
| Physical property | Value | Units | Test method | ||||||
| Barcol Hardness | 50 | --- | ASTM D-495 | ||||||
| Water absorption(25 Centigrade,24h) | 0.2-0.5 | % | ASTM D-570 | ||||||
| Density | 1.75-2.00 | g/cm3 | ASTM D-792 | ||||||
| Coefficient of thermal expansion(LW) | 5.0 | 10-6/Centigrade | ASTM D-696 | ||||||
| Coefficient of thermal conductivity | 0.4 | W/(m.K) | ASTM C-518 | ||||||
| Elongation to break | 0.9 | % | ASTM D-638 | ||||||
| Electrical property | Value | Units | Test method | ||||||
| Arc resistance(LW) | 120 | seconds | ASTM D-495 | ||||||
| Dielectric constant(PF) | 5 | @60hz | ASTM D-150 | ||||||
| Dielectric strength(PF) | 8 | KV/mm | ASTM D-149 | ||||||
| Dielectric strength(LW) | 1.6 | KV/mm | ASTM D-149 | ||||||
| Flammability property | Value | Units | Test method | ||||||
| Tunnel test | Max 25 | second | ASTM E-4 | ||||||
| Oxygen data | 25-28 | % | ASTM 2863 | ||||||
| 28-32 | |||||||||
| >32 | |||||||||
| Flammability classification | Self extinguish | ASTM D635 | |||||||
