Audited Supplier
PTL Series Slurry Pump
Product Introduction
This series of pump in hydraulic design, structural design, taking advantages of similar products at home and abroad and innovation, and flow components developed by using the special material GLH - 5, GLH - 6, with high efficiency and energy saving, corrosion resistance to abrasion, small vibration, low noise, reliable running, shaft seal, no leakage, long service life, maintenance is convenient wait for a characteristic.
The comprehensive performance of the pump is leading in China.
Suitable for conveying limestone or gypsum slurry in desulfurization system of thermal power generation, steel sintering, aluminum smelting and oil refining industries.
The maximum chloride ion content of the slurry allowed to be transported is 20000ppm, the pH value is between 4.5 and 12, the slurry temperature is ≤ 65ºC , and the maximum weight concentration of the slurry Cw is 60%.
Detailed Photos
Technical Parameters
| Model | Clear water performance | |||||
| Flow Q(m³/h) | Head H(m) | Rotational speed n(r/min) | MAX.particle size | Max. motor allowed | Weight (Kg) | |
| 850PTL-90 | 3142-9700 | 6.0-28.7 | 300-592 | 181 | 900 | 5900 |
| 750PTL-84 | 2157-7360 | 5.2-24.5 | 300-591 | 168 | 630 | 5420 |
| 650PTL-82 | 664-5600 | 5.2-27.8 | 300-595 | 152 | 500 | 4900 |
| 550PTL-85 | 1036-4080 | 5.7-26.8 | 300-591 | 135 | 400 | 4500 |
| 400PTL-78 | 720-2865 | 11.6-51.1 | 400-740 | 104 | 500 | 3700 |
| 350PTL-60 | 580-2403 | 8.9-53 | 490-989 | 96 | 400 | 2790 |
| 250PTL-45B | 138-645 | 35.7-31 | 490-990 | 51 | 90 | 1750 |
| 200PTL-55B | 1139-630 | 11.3-53.7 | 490-990 | 56 | 132 | 1540 |
| 200PTL-50B | 62-278 | 9.3-44.6 | 490-980 | 30 | 90 | 1470 |
| 200PTL-50 | 63-279 | 9.3-44.6 | 490-990 | 30 | 90 | 1470 |
| 200PTL-40 | 122-503 | 11.2-61.2 | 700-1490 | 40 | 132 | 830 |
| 150PTL-45B | 41-219 | 12.1-76.4 | 700-1480 | 24 | 90 | 800 |
| 150PTL-40B | 61-268 | 12-61 | 700-1480 | 29 | 75 | 620 |
| 150PTL-35 | 77-323 | 8.8-45.9 | 700-1480 | 42 | 75 | 550 |
| 100PTL-36 | 41-167 | 8.9-47 | 700-1480 | 62.4 | 37 | 480 |
| 85PTL-40 | 34-159 | 12.2-63.2 | 700-1480 | 62 | 55 | 490 |
| 85PTL-30 | 21-99 | 7.0-35.6 | 700-1480 | 54.6 | 22 | 260 |
| 75PTL-40D | 16-76 | 9.5-52 | 700-1480 | 45 | 30 | 320 |
| 75PTL-30 | 16-78 | 6.1-36.3 | 700-1480 | 48.5 | 18.5 | 210 |
| 50PTL-25 | 16.8-75 | 13.7-88.6 | 1400-2950 | 42.5 | 45 | 185 |
| 50PTL-20B | 7.9-37 | 10.7-57.5 | 1400-2930 | 53 | 15 | 160 |
| 50PTL-19 | 7.8-34.9 | 12.3-57 | 1400-2930 | 58.8 | 15 | 173 |
| 50PTL-17 | 4.6-23.4 | 9.2-44.6 | 1400-2900 | 52.4 | 7.5 | 127 |
| 40PTL-25 | 4.7-19.9 | 3.3-21.6 | 700-1440 | 38 | 4 | 107 |
| 40PTL-15 | 4.4-19.3 | 6.2-35 | 1390-2900 | 41.8 | 5.5 | 89 |
Product Diagram
Certificates
Company Profile
At present our products involve more than a dozen series and more than 100 varleties. The main products are horizontal slurry pumps, vertical slurry pumps, rubber lined pumps, gravel pumps, froth pumps, desulfurization pumps, filter press feed pumps, dredge pumps, sewage pumps, submersible slurry pumps and spare parts. The compamy has a number of high-quality, high-level and experienced technical and management elites. The material can be adjusted according to the actual working conditions of customers, So as to improve the wear resistance and corrosion resistance of the pump and greatly prolong the service life of the pump. Our products are widely used in beneficiation, metallurgy coal,electric power, petroleum, chemical industry, sand excavation, urban sewage, environmental protection and other industries.
Workshop
WorksWorkshophop
Worksho
Workshop
Product Accessories
Application
Product Transportation
FAQ
Pansot mainly produce horizontal slurry pumps, vertical slurry pumps, rubber lined pumps, gravel sand pumps, froth pumps, desulfurization pumps, filter press feed pumps, dredge pumps, sewage pumps, submersible slurry pumps and spare parts.
2. Is Pansto direct factory or trader?
Yes, Pansto is direct Slurry Pump Manufacturer with Export and Import License, having its own foundry workshop, Machining Workshop, Heat treatment equipment and Assembly workshop, also advanced quality inspection equipment.
3. Can you provide OEM, ODM service?
Yes. OEM Service is an important part of our business. Pansto Pump accept OEM business as samples or drawings of all kinds of pumps and casting spare parts. And more we offer ODM service too.
4. What is your warranty period?
We provide one year of unconditional warranty on our products for the manufacturing defects.
5. What about delivery time?
Normally our production time is within two weeks. Please confirm before order.
6. The Min MQQ?
The MQQ is one pcs pump or spare parts.
Welcome to Contact Us!
