General Purpose Acetic Silicone Sealant

Features

1. One-component, deacetic acid type, fast curing at room temperature.

2. Good weather resistance, high and low temperature resistance.

3. Good bonding extensibility and excellent bonding performance to most building materials.

The main purpose

1. Installation and sealing of various glass doors and windows;

2. Bonding and sealing of display cabinets;

3. Filling and sealing of various interior decorations;

4. Other construction and industrial uses.

Construction Notes

1. Not for use in structural bonded assemblies.

2. Not suitable for use on all surfaces with grease, plasticizers or solvents.

3. Not suitable for use in confined spaces or surfaces in direct contact with food and drinking water.

4. It is not suitable for construction if the surface temperature of the substrate is lower than 4°C or higher than 40°C.

Safety Instructions

1. Acetic acid will be released during the curing process of this product. If the concentration of acetic acid in the air is too high, it will damage the respiratory system and irritate the skin and eyes. Therefore, the workplace should be well ventilated.

2. The uncured product is acidic, which is obviously irritating and corrosive to the skin and eyes. Not suitable for direct contact with skin and eyes. In case of accidental contact, please rinse immediately with plenty of water, and then consult a doctor.

3. This product will not release harmful substances after curing. Does not cause harm to the skin.

4. Uncured glue should be kept away from children, and the product should be placed out of reach of children.

Storage

Stored in a dry, ventilated, and cool place below 27°C, the shelf life is 12 months.