Audited Supplier
300
One Year Warranty
Electric
Frozen and Chilled
Semi-Automatic
Bone Saw
220V/380V
Customized
300 Stainless Steel Bone Sawing Machine
Stainless Steel
Frozen Meat Cutter,Bone Saw Cutter
Bone Saw Cutter
Meat Processing Facotry,Catering, Butcher etc.
Blade Saw
100kg
Hante
Wooden Box Packaging
770mm*650mm*1580mm
Made in China
8438500000
Product Description
| Machine model | 300 stainless steel bone sawing machine | machine weight | 100kg |
| motor power | 1800W | rated voltage | 220v/380v |
| Surface Treatment | Surface wire drawing and polishing | Maximum working size | wide220mm*high300mm |
| saw blade model | 2020mm | table size | 715mm*615mm |
| external dimension | 770mm*650mm*1580mm | ||
| Operation notes | |||
| 1,installation of saw belt, pay attention to the direction of the saw blade, in the right side of the cutting surface saw teeth downward. | |||
| 2,Scraper blade to press the saw blade but not contact saw teeth, otherwise it will increase the noise, reduce the life of saw blade. | |||
| 3,When the bone sawing machine is not in use, loosen the handle with tension on the top of the machine for 2 turns, and tighten the handle when the machine is turned on next time, so that the service life of the saw blade can be prolonged. | |||
| 4,When the sawing machine opens the door, the safety switch stops the machine, but the saw belt will continue to rotate under inertia. Do not touch the saw belt at this time. | |||
| 5,Do not cut the meat directly by hand without any protection. Especially when sawing small meat products, the operation should be concentrated and careful. |
| Saw blade replacement procedure | |||
| 1.When reinstalling the saw belt, loosen the tensioning device (counterclockwise from the upper direction of the machine) and install the new saw belt. At this time, pay attention to the direction of the saw belt, otherwise the saw belt will loose and fall off. | |||
| 2.Ensure that the tape is properly installed between the scraper, top pulley, bottom pulley, and center plate, and can pass through the guide groove in the center. | |||
Purpose:
Suitable for cutting all kinds of animal bones, frozen meat, etc.
characteristic:
1. Stainless steel body, safe and hygienic.
2. The safety lever switch is installed. When the machine cover is opened, the machine stops working.
3. Good waterproof performance, easy to clean.
4. Low noise, high horsepower and low material loss.
