Audited Supplier
PTFE bolts and nuts
PTFE
Customized or as Per Drawing
Customized or as Per Drawing
Customized or as Per Drawing
Machinery, Chemical Industry
-180ºC-+250ºC
White, Support Customization
High Temperature and Corrosion Resistance
Shandong Dongyue
JSLW
Wooden Box
Support customization
China
39209910
Product Description
Product Description:
Introduction of PTFE bolts and nuts:Polytetrafluoroethylene is commonly known as "Plastic King". It has excellent chemical stability, corrosion resistance, airtightness, high lubrication and non-stick properties, electrical insulation and good anti-aging endurance. Polytetrafluoroethylene is a synthetic polymer material that uses fluorine to replace all hydrogen atoms in polyethylene. This material is resistant to acids, alkalis, and various organic solvents, and is almost insoluble in all solvents. At the same time, PTFE has the characteristics of high temperature resistance, and its friction coefficient is very low, so it can be used for lubrication, and it has become an ideal coating for easy-to-clean woks and water pipes.
Product advantages:
1. High temperature resistance-the working temperature can reach 250ºC.
2. Low temperature resistance-good mechanical toughness; even if the temperature drops to -196ºC, it can maintain 5% elongation.
3. Corrosion resistance-for most chemicals and solvents, it is inert, resistant to strong acids and alkalis, water and various organic solvents.
4. Weather resistance-has the best aging life among plastics.
5. High lubrication-the lowest friction coefficient among solid materials.
6. No adhesion-it is the smallest surface tension among solid materials and does not adhere to any substances.
Product Performance:
| Item | Denisty | Tensile Strength | Elongation | Dielectric Strength |
| Unit | 2.1-2.3g/cm3 | ≥15.0Mpa | ≥150% | 10kv/mm |
Our Service
1. Providing technical consultation.
2. Samples are free.
3.We could customize various products with your brand logo according to your requirements.
4. Your inquiry will be replied within 1 hours during working time,Within 24 hours when rest time.
5.Orders will be produced exactly as request and approved samples.
6. Before shipment,our QC will have inspection to make sure the quality.
7.We always try best to ensure every order to delivery in time.
8.Special packaging according to request.
