Factory Customized Printable Release Film Printable Transparent Release Film

Product composition
This release film is made of PET (polyester film) as the base material, coated with silicone oil release agent on one side, and coated with printable coating on the non-release surface.
Product characteristics
1. High cleanliness for production and processing in a thousand-class purification environment;
2. The coating is uniform, the release force is stable, and the change range is small;
3. The appearance is free of scratches, good flatness, wrinkles, dirt and crystal spots;
4. High residual adhesion rate (≥ 85%), little silicon transfer, no impact on the performance of the bonding material, no pollution;
Product specification
1. Width: 1090mm (customizable according to customer requirements)
2. Length: 200-3000m (slitting and rewinding according to customer requirements)
3. Inner diameter of coil core (paper tube or plastic tube): 3 inches (76.2 mm) or 6 inches (152.4 mm)
Scope of application
This product is suitable for 6-color rotary printing.


Product packaging
1. Products are generally packed in cartons and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. It can also be packaged according to the customer agreement

instructions
1. Static electricity may be generated during unwinding or rewinding during use. The electrostatic layer will damage the release layer and lead to poor peeling. If necessary, anti-static treatment can be carried out on the back or static elimination equipment can be used to eliminate static electricity.
2. In order to obtain the best use effect, it is recommended to use this product within 6 months from the purchase date;
3. It must be retested before use after expiration;
4. Recommended storage conditions: avoid direct sunlight, store under the indoor ambient temperature of 25 ºC ± 2 ºC and humidity of 60% ± 10%.
5. When using this product, please fully study whether the purpose (purpose, condition) is suitable or not in advance, and decide whether the product conforms to its standard by yourself. The content beyond the specification cannot be guaranteed.