Audited Supplier
Factory Direct Sale EPDM Waterproof Roof Sheet Waterproofing Membrane
EPDM Rubber Waterproofing Membrane
Rubber membrane is manufactured from synthetic EPDM rubber. The EPDM rubber membranes is a single-ply membrane that can be used for various applications such as waterproofing of basements, roofs/terraces, expansion joints, wet areas (toilet blocks), facades, etc. It is a single product that can be used for waterproofing most parts of a building. The EPDM rubber waterproofing membranes are techno-commercially much better than substitutes such as bitumen membranes, crystalline products, admixtures, various coatings, etc. The use of these products may be avoided in projects where EPDM rubber membranes are used. The EPDM waterproofing membranes are an excellent substitute to the torch-on membranes.
Advantage:
- Resistant to UV, Ozone, and air pollutants.
- Wide range of temperature resistance form -40°C to +160°C.
- Nearly millions of square meters of EPDM membrane have been installed on rooftops globally and they are known to have a service life of beyond 30 years.
- No torches or gas required during installation.
- Flame free and heat free installations.
- It is an environmentally and recyclable system.
- Lightweight: around 1.25Kgs/SQM.
- Single product for various areas such as basements, roofs, podiums/landscape areas, expansion joints, etc.
- Acts as an anti-root barrier. So they are idea for green roofs and landscape projects.
- Special grade of EPDM membrane are fire resistant.
Architects, roof consultants and contractors have come to depend on EPDM's time tested, long-term performance.
| Thickness(mm): | 0.5, 1.0, 1.2, 1.5, 1.5, 2.0 |
| Allowable deviation(%): | -10 to +15 |
| width(mm): | 1000, 1200 |
| Square meter (m2) / roller: | 20, 24 |
| The specifications can be customized by the buyers' requirments. | |
| Product appearance | ||||||
| Item number | JF1- EPDM- 20mX1.0mX1.2mm | |||||
| Visible defects | No defects, conform to GB/T18173.1-2012 | |||||
| Technical specification | ||||||
| Item | Standard | GB/T18173.1-2012 | ||||
| Thickness | mm | 1.2(-5/+10%) | ||||
| Length | m | 20(-0.5/+1%) | ||||
| Width | m | 1.0(-1/+1%) | ||||
| Mass per unit area | Kg/m2 | |||||
| 1 | Tensile Properties | Max Tension strength (N/cm) >= | Cross the roll | ≥4.0 Mpa | 9.1 | Qualified |
| Along the roll | ≥4.0 Mpa | 8.3 | Qualified | |||
| 2 | Elongation at break (%)>= | Normal temperature(23ºC) | Cross the roll | ≥400 | 480 | Qualified |
| Along the roll | ≥400 | 492 | Qualified | |||
| Low temperature(-20ºC) | Cross the roll | ≥200 | 242 | Qualified | ||
| Along the roll | ≥200 | 246 | Qualified | |||
| 3 | Tensile Srenght at break | Cross the roll | ≥18 KN/m | 27 | Qualified | |
| Along the roll | ≥18 KN/m | 26 | Qualified | |||
| 4 | Watertightness | 0.3Mpa, 30 min, impermeable | impermeable | Qualified | ||
| 5 | Foldability at low temperature | -30ºC no cracks | no cracks | Qualified | ||
| EPDM waterproof roll specification: | ||||
| The item name | Value | Applicable test items | ||
| 1 | Tension Strength (N/cm) (MPa) | Normal temperature ≥ | 7.5 | GB6.3.2 |
| 60ºC ≥ | 2.3 | |||
| 2 | Elongation at break % | Normal temperature ≥ | 450 | |
| -20ºC | 200 | |||
| 3 | Tear strength N | ≥ | 25 | GB6.3.3 |
| 4 | Water tightness (0.3Mpa. 30 min) | No Leakage | GB6.3.4 | |
| 5 | Flexibility at low temperature (ºC)≤ | -40 | GB6.3.5 | |
| 6 | Heat expansion (mm) | Extended ≤ | 2 | GB6.3.6 |
| Contraction ≤ | 4 | |||
| 7 | Hot air ageing (80ºC×168h) | Fracture tensile strength retention %≥ | 80 | GB6.3.7 |
| Keep rate tore elongation %≥ | 70 | |||
| 8 | Alkaline [10%Ca(OH)2 Normal temperature×168h] | Fracture tensile strength retention %≥ | 80 | GB6.3.8 |
| Keep rate tore elongation %≥ | 80 | |||
| 9 | 200×10-8 Ozone aging (40ºC×168h) | - | GB6.3.9 | |
| 10 | Artificial climate ageing | Fracture tensile strength retention %≥ | 80 | GB6.3.10 |
| Keep rate tore elongation %≥ | 70 | |||
| 11 | Bond peel strength | N/mm Standard test condition ≥ | 1.5 | GB6.3.11 |
| Inundate retention (Normal temperature×168h) %≥ | 70 | |||
Application
1) Roofs, basement, toilet, bridge, underground, tunnel and dam.
2) Industrial and civil building waterproof.
3) Geo-synthetic liner for swimming pool, channels, irrigation system.
4) Especially for projects with high requirements in durability, anti-corrosion and deformation.
Packaging, storage and transportation:
1. Waterproof materials should be stored under dry and ventilated conditions.
2. Different types of membranes must be piled separately.
3. Under usual condition, storage period is one year since production date.
4. Waterproof materials should be put vertically during transportation.
5. It should be kept away from sunshine and rainwater.
6.Transport and storage process should be away from the fire source, storage temperature does not exceed 35 ºC, the storage period is 1 year.
Certificates:
FAQ:
Q1:How to get the sample?
A :We can provide you free samples for quality inspection.
Q2:What's are the MOQ?
A :The MOQ is 500 square meters usually.Also we can according to your condition to set the MOQ.
Q3:How about the delivery time?
A :Delivery time about 7days after your deposit or L/C at sight.
Q4:Can we visit your factory to inspect the goods for the order?
A :Welcome to visit our factory to inspect the quality.We sincerely hope to establish a honest business relationship.
