Audited Supplier
| Product Name | Custom matt light food packaging zip lock silver mylar aluminum foil bag | ||
| Size | 130W*210L+60 Bottom gusset mm | ||
| Material | PET/VMPET/PE | ||
| Thickness | 120 microns | ||
| MOQ | Normally it's 10,000pcs or negotiated | ||
| Sample | Welcome to ask our company catalogue If you need FREE Sample , please contact us. | ||
| Bag types |
| ||
| Industrial Use | coffee, tea, whey protein powder, dog treat food, fishing lures, bait, chia seeds, spices, bath salts, cashew nuts, dried fruits, potato chips, popcorn, granola, candy, ice cream, popsicle, juice, energy drink, beef jerky and all kinds of snacks food. Socks, clothes and other commodity products. | ||
| Features | 1). The bag comes with zipper (tear notches). You can either manual seal zipper part, or you can heat seal the open top section above the zipper, so that achieve storage effect.ODOR/ SMELL PROOF--MOISTUREPROOF WATERPROOF-- Keep your products clean and free from moisture. 2). 3 Sides are Heat Sealed - No Leakage; V-cut Tear Notch; Bottom Gusset allows more volume packaging. 3). Quality Laminated Material Construction: PET (polyethylene terephthalate) +Aluminum +PE (polyethylene) Food safe. The most inner area is PE, which is perfectly suitable for packaging food. Effectively maintains Taste and Scent. |
| Surface printing | Gravure printing |
| Material structure | PE |
| Sealing method and handle type | Heat sealing sealing |
| Accept Customization | Yes |
| Product Name | Retort foil packaging bag |
| Sample | Free (Shipping) |
| Function | High barriers |
| Printing | Gravure printing |
| Logo | Custom logo printing is accepted |
| Usage | Food, seafood, snacks, etc |
| Capacity | 1 gallon, 5 gallon, customized |
| Size | Various sizes/customized |
| Size & Thickness | Custom size bags |
| Advantages | food-grade packaging |
| Waterproof | Waterproof |
| Size | Middle |
| Usage | Transportation |
1. Temperature Control vs. Temperature Protection - What's the difference?
Typically, thermal covers etc. do not 'hold' temperature between limits. This is in contrast to Temperature Controlled Packaging that utilises insulating and phase change materials to hold temperature for a validated duration (e.g. 72hrs). For this reason, thermal covers would be considered as 'temperature protection' rather than 'temperature control' packaging.
2. Do Thermal covers work the same in cold weather?
They will certainly slow down the temperature exchange in cold weather, often better than in hot conditions. In chamber testing and live trails, we see that it takes longer for the freight temperature to come down than it did to rise!
3. Are thermal covers easy to fit and remove?
Yes, they usually come preformed and fit over the pallet like a hat, then sealed into place using tape. This should take no more than a few minutes. Removal should be just as quick.The only exception to this may be the rolls of silver backed bubble often used. This can take two people up to 20 minutes if not using the preformed solution.
4. Will adding a second cover double the performance?
No, but it will improve performance quite considerably by an estimated 40-60% depending on various conditions. A third cover would only add around 5-15% performance.
5. Will using gel packs or phase change materials help performance?
Potentially yes, live testing would provide an indication of how much. The main considerations would be practicality, operational and cost. A layer of gel packs could be placed on top of the product, under the cover, therefore providing an additional barrier to direct sunlight. If using reusable thermal blankets, pockets can be stitched in to hold the gel packs on the side panels.
6. When is the best time to fit thermal covers during the shipping process?
Covers should be fitted at the point where the freight is at the correct temperature. The covers should also be at the same temperature.
