Audited Supplier
dx51d
Offering After-Sales Support Services
It Depends on The Product
ASTM, JIS, GB, AISI, DIN, BS
ISO, RoHS, IBR
Galvanized
Cold Rolled
Container Plate
Mill
Stock
±1%
7 Days
SGCC/CGCC/Tdc51dzm/Tdc52dts350gd/Ts550gd/Dx51d+Z
30-275G/M2
30%Tt Advance + 70% Balance
Dx51d
Steel Coil, Cold Rolled Steel Sheet
3-10 Tons
Fob CIF CFR
1 Ton
BAO WU
Standard Marine Packing
1000-1500mm or customization
China
7210490000
Product Description
Technical Standard | EN10147, EN10142, DIN 17162, JIS G3302, ASTM A653 |
Steel Grade | Dx51D, Dx52D, Dx53D, DX54D, S220GD, S250GD, S280GD, S350GD, S350GD, S550GD; SGCC, SGHC, SGCH, SGH340, SGH400, SGH440, SGH490,SGH540, SGCD1, SGCD2, SGCD3, SGC340, SGC340 , SGC490, SGC570; SQ CR22 (230), SQ CR22 (255), SQ CR40 (275), SQ CR50 (340), SQ CR80(550), CQ, FS, DDS, EDDS, SQ CR33 (230), SQ CR37 (255), SQCR40 (275), SQ CR50 (340), SQ CR80 (550); or Customer's Requirement |
Type | Coil/Strip |
Type of Coating | Hot Dipped Galvanized Steel(HDGI) |
Zinc Coating | 30-275g/m2 |
Quality | Approved by SGS,ISO |
Coil Weight | 3-10 metric ton per coil |
Package | Water proof paper is inner packing,galvanized steel or coated steel sheet is outer packing , side guard plate,then wrapped by seven steel belt.or according to customer's requirement |
Export market | Europe, Africa, Central Asia, Southeast Asia, Middle East, South America, North America, etc |
Delivery Time | Usually within 10-45 days after receipt of advance payment |
Technique | Hot Rolled Or Cold Rolled |
Payment Terms | TT30% Deposit, balance after BL copy in 21 days, or LC at sight |
(1) Normal zinc coating spangle coating
In the normal solidification process of zinc layer, zinc grains grow freely and form a coating with obvious zinc flower morphology.
(2) minimized spangle coating
During the solidification process of zinc layer, the zinc grains are artificially limited to form the smallest zinc flower coating as possible.
(3) zinc-free coating spangle-free
By adjusting the chemical composition of the plating solution, there is no visible zinc flower morphology, and the surface is uniform.
(4) zinc-iron alloy coating
Heat treatment of the steel strip after the galvanized bath, so that the entire coating to produce zinc and iron alloy layer, this coating appearance is dark gray, no metallic luster, easy to powder in the vigorous forming process, suitable for in addition to general cleaning, without further treatment can be directly painted coating.
(5) differential coating
On both sides of the galvanized steel sheet, a coating with different zinc layer weights is required.
(6) skin pass
Finishing is a cold rolling process of small deformation on galvanized steel plates for one or more of the following purposes.
Improve the surface appearance of galvanized steel or suitable for decorative coating; To temporarily minimize the phenomenon of slip lines (Ludus lines) or creases that occur when the finished product is not processed
In the normal solidification process of zinc layer, zinc grains grow freely and form a coating with obvious zinc flower morphology.
(2) minimized spangle coating
During the solidification process of zinc layer, the zinc grains are artificially limited to form the smallest zinc flower coating as possible.
(3) zinc-free coating spangle-free
By adjusting the chemical composition of the plating solution, there is no visible zinc flower morphology, and the surface is uniform.
(4) zinc-iron alloy coating
Heat treatment of the steel strip after the galvanized bath, so that the entire coating to produce zinc and iron alloy layer, this coating appearance is dark gray, no metallic luster, easy to powder in the vigorous forming process, suitable for in addition to general cleaning, without further treatment can be directly painted coating.
(5) differential coating
On both sides of the galvanized steel sheet, a coating with different zinc layer weights is required.
(6) skin pass
Finishing is a cold rolling process of small deformation on galvanized steel plates for one or more of the following purposes.
Improve the surface appearance of galvanized steel or suitable for decorative coating; To temporarily minimize the phenomenon of slip lines (Ludus lines) or creases that occur when the finished product is not processed
Q1. What are your company's main products ?
A1: Our main products are stainless steel plate/sheet, coil, round/square pipe, bar, channel, etc.
Q2. How do you control quality ?
A2: Mill Test Certification is supplied with shipment, Third Party Inspection is available. and we also get ISO,SGS.
Q3. What are the advantages of your company ?
A3: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless
steel companies.
Q4. How many coutries you already exported ?
A4: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Turkey, Jordan,India, etc.
Q5. Can you provide sample ?
A5: We can provide the samll samples in stock for free, as long as you contact us.
Customized samples will take about 3-5days.
*Note: If you have any question, please feel free to click "Contact Supplier" as below,we will get back to you immediately.
