Audited Supplier
ODS Pilot Burner is called ODS for short.
ODS long open flame can avoid the above dangers and make the gas appliance operate safely in a non-ventilated environment. When the oxygen content in the air reaches 18.5% to 19.5% and the carbon dioxide content reaches 0.8% to 1.5%, the ODS will cut off the gas source and stop the gas appliance to ensure personal safety.
Advantages:
1. ODS pilot burner can avoid danger and promise safe operation in unvented space.
2. ODS pilot burner can cut off energy source when oxygen content arrives 18.5% to 19.5% and CO2 content arrives 0.8% to 1.5%.
3. All ODS pilot burner are 100% test before shipment.
Replacement Ods Pilot Burner for Gas Heater
INSTRUCTIONS FOR GAS PILOT ASSEMBLY
1.To Remove:
1.SHUT OFF GAS SUPPLY and trun gas thermostat control valve to OFF position.
2.Remove air shutter screw and slide air shutter to the right.
3.Remove main burner screw.
4.Unscrew thermocouple lead.
5.Unscrew pilot gas line.
6.Remove burner and pilot assembly from water heater.
Pilot assembly can now be separated from main burner by removing screw.
2.To Stall
1.Attach pilot assmebly to main burner with screw,tighten securely. Pilot flame spreader should be approx.1/8'' from end and side of main burner.
2.Install assembly onto combustion tube with screw;tighten securely.
3.Secure thermocouple lead to control. This is a flexible tube and can be bent to fit. CAUTION: Do not ben this lead withing 1/2'' of either end. Tighten finger-tight plus 1/4'' trun with wrench.
4.Firmly tighten pilot gas line to control.
5.Position air shutter and insert screw.
6.TRUN ON GAS SUPPLY and trun control to pilot position ( push button if applicable)
7.NOTE: Check all connections for leaks using gas leak detector prior to using equipment.
8.Adjust main burner per instrustions.
| Model | SNO-315 |
| Brand | SINOPTS |
| Size | Customized |
| Material | Metal.brass |
| Feature | Eco-Friendly |
| Usage | Oven, gas stove, gas heater, fryer etc. |
| Media | LNG,Natureal gas, Propane gas |
| Certificate | CE/IS09001/CSA/AGA/UL |
| Injector | stainless steel/ruby/copper |
| Surface | High-quality polished |
How to make an inquiry for ODS
If you want more product content, please send us an inquiry. We look forward to establishing a good cooperative relationship with you!
