Audited Supplier
REN37-FA160W2P
1y
<5 Years
72pcs
Outdoor
New
EST, ISO, CB, CE, TUV
Monocrystalline Silicon
180W
18V
1355*780*30mm
780*675*65mm
OEM/ODM
Cartoon
780*675*65mm
China
8541430000
Product Description
Factory Folding 180W Glass Aluminum Frame Portable PV Power Solar Panel Outdoor Off-grid
| Maximum power at STC(Pmax) | 180W |
| Optimum Operating Voltage(Vmp) | 18.4V |
| Optimum Operating Current(Imp) | 9.8A |
| Open-Circuit Voltage(Voc) | 22.68V |
| Short-Circuit Current(Isc) | 10.2A |
| Operating Temperature | -40ºC to +85 ºC |
| Maximum System Voltage | 1000Vdc(IEC)/600Vdc |
| Power Tolerance | ±3% |
| Front Glass | 3.2mm Tempered glass |
| Frame | Anodized aluminium alloy |
| Folded size | 780*675*65mm |
| Unfolded size | 1355*780*30mm |
| Net weight | 12.7KGS |
| Cell Type | Monocrystalline |
| Cell Efficiency rate | 21%-23% |
| Junction Box | Ip67 rated |
Features:
· Ajustable Padded, moulded carry bag
· Heavy duty carry handle, hinges and clasps Stainless steel telescopic&adjustable legs
· Weatherproof solar charge controller.
· Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Pre-drilled holes on the back of the solar panel allow for fast mounting and securing.
· Compatible with different mounting systems such as Z-brackets, Pole Mounts, and so on.
· Ajustable Padded, moulded carry bag
· Heavy duty carry handle, hinges and clasps Stainless steel telescopic&adjustable legs
· Weatherproof solar charge controller.
· Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Pre-drilled holes on the back of the solar panel allow for fast mounting and securing.
· Compatible with different mounting systems such as Z-brackets, Pole Mounts, and so on.
1.This Panel Kit comes out with 5m cable alligator clip to charge 12V battery
2. Combined by 2pcs individual high-efficient monocrystalline silicon solar panels;
3. Stainless steel telescopic legs ( Length can be stretchable)
4. High-strength low-iron toughened glass
5. With anodized aluminum frame(holes can be mounted)
6. With a black fabric bag to keep clean and portable
7. With a charge controller and electronic circuit protection
8. Long life time: >=25 years, small attenuation (Resistance to humidity and salt fog corrosion)
9. Stability and high efficiency photoelectric conversion, the average conversion rate is 17% 0~+3% performance tolerance
10. Accessories: controller(20A) , cable (5m), alligator clips, supporting leg,carry bag, junction box,black plastic corner protection, lock and handle
11. Suitable for home/caravans/camper (for charging lap-top, phones, lights, TV,radios, small pumps and other small household electrical appliances)
2. Combined by 2pcs individual high-efficient monocrystalline silicon solar panels;
3. Stainless steel telescopic legs ( Length can be stretchable)
4. High-strength low-iron toughened glass
5. With anodized aluminum frame(holes can be mounted)
6. With a black fabric bag to keep clean and portable
7. With a charge controller and electronic circuit protection
8. Long life time: >=25 years, small attenuation (Resistance to humidity and salt fog corrosion)
9. Stability and high efficiency photoelectric conversion, the average conversion rate is 17% 0~+3% performance tolerance
10. Accessories: controller(20A) , cable (5m), alligator clips, supporting leg,carry bag, junction box,black plastic corner protection, lock and handle
11. Suitable for home/caravans/camper (for charging lap-top, phones, lights, TV,radios, small pumps and other small household electrical appliances)
In 2022, the company introduced a new automatic large solar moldue production line. In addition, there are 6 wafer series welding machines, 2 high-temperature laminating machines, 4 IV monitoring machines and 2 EL monitoring machines, and other machines.
We have two finished product storage warehouses, about 1500 square meters. Packaging and transportation can be customized according to customer requirements.
FAQ:
Q1. Can I have a sample order for solar panel?
A: Yes, we welcome sample order to check and test quality.
Mixed samples are acceptable.
Q2. How do you send the goods?
A: Normally sample order is sent by DHL, UPS, FedEx or TNT, bulk order ship by sea.
Q3.What about the lead time?
A:Sample needs 5-10days.
Mass production time: 15--20 days.
Q4.Do you accept custom design and size ?
A: Yes, we can accept custom design and size.
Q5. Is it OK to print my logo on package?
A: Yes.we can do printing customer logo based on customer's requirement.
