Audited Supplier
S-60-12
Single
2 Years
51 - 100W
110-220V
Series Switching Power Supply
Self-excited Switching Power Supply
Frequency Modulation Type
Terminal Power Distribution Equipment
Two-way Transmission
PWM
CE, RoHS, ISO, CCC, CB
Mwish
MWISH
Export Package
159*98*38 30PCS/CTN
China
8504401990
Product Description
| *Low price and high reliablity *105ºC Ootput capacitor *AC input power suitable for the world *High efficiency and low operation tenperature *Sofft-start current can reduce the AC input impact effecticly *With short-circuit and overload protection *Compact size,light weight *100%full-load bum-in test *Installed with EMI filter, mlnlmum wave | ||||
| Specification ModelNo. | S-60-5 | S-60-12 | S-60-15 | S-60-24 |
| DC output voltage | 5V | 12V | 15V | 24V |
| Output voltage range (Note:2) | ±2% | ±1% | ±1% | ±1% |
| Rated output current | 12A | 5A | 4A | 2.5A |
| output current range | 0~12A | 0~5A | 0~4A | 0~2.5A |
| Wave and noise (Note:3) | 75mVp-p | 60mVp-p | 60mVp-p | 50mVp-p |
| Inlet stability (Note:4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load stability (Note:5) | ±1% | ±0.5% | ±0.5% | ±0.5% |
| DC output power | 60W | 60W | 60W | 60W |
| Efficiency | 80% | 83% | 84% | 85% |
| Adjustable range for DC voltage | ±10% | ±10% | ±10% | ±10% |
| AC input voltage range | 85-132VAC/170-264VAC 47-63Hz 240~370VDC | |||
| output current | 1.3A/115V 0.65A/230V | |||
| AC rush current | 15A/115V 36A/230V | |||
| Leakage current | <0.5mA/240VAC | |||
| Overload protection | 105%-150% hiccup mode,auto-recovery | |||
| Over-Voltage protection | 115%-135% rated output voltage | |||
| High-temperature protection | -10ºC~+60ºC,20%~90%RH | |||
| Temperaut re cofficient | ±0.03%/ºC(0~50ºC) | |||
| Setup,rise,hold up time | 200ms,100ms,30ms | |||
| Vibration | 10~500Hz, 2G 10min,1 cycle Pariod for 60min, Each axes | |||
| Withstand voltage | I/P-O/P:3Kv I/P-FG:1.5KV O/P-FG:0.5KV 1minute | |||
| Insulation resistance | I/P-O/P IP/FG OP-FG:500VDC/100MΩ | |||
| Working temperature and humidity | -10ºC~+60ºC,20%~90%RH | |||
| Overall dimension | 159*98*38 mm | |||
| Safety Standards | MeeUL 1012 requirement | |||
| EMC Standards | Design refer to GB9254,EN55022 ClassA | |||
| Weight | 0.5Kgs | |||
| Note: 1.The testina condition for The Paramenter is:230VAC input,rated load, 25ºC 70% RH Temperature 2.Error incude the seting error, line stability and load stability 3.Wave test:adopt in "A12"double wire for 20MHz,and 0.1 UF capacitor short-circuit for interrupt bug 4.Inlet voItage stability test:When is over load,the lowest voItage of inlet is up to the hiqhest voltaqe 5.Load stability test:the load is from 0% to 100% 6.C3,4 must be knocked down | ||||
