Audited Supplier
The The fibers are positioned in a loose tube made of high modulus plastic and filled with gel. Tubes (and fillers) are stranded around the non-metallic strength member to form the cable core. Then the core is filled with water-blocking compound and covered with a PE inner jacket. After the corrugated steel tape(CST) is longitudinally armored over the inner jacket, the cable is completed with a PE outer jacket.
• Good mechanical and thermal performance
• FRP as the central strength member
• Hydrolysis resistant loose tube
• Tube filling gel ensures critical protection of fiber
• Stranded compact structure eliminating contraction of tubes
• Rugged, durable PE jacket protects against UV radiation, fungus etc.
• Crush resistance and flexibility
• Water-blocking measures :
- Loose tube gel-filled
- 100% cable filling compound
- Corrugated steel tape (CST) enhancing moisture-proof
Direct-burial / Duct / Non Self-supporting Aerial Installation
| Item | Value |
| Fiber Counts | 96 |
| Tubes | 8 |
| Tube Material | PBT |
| Fiber Count/ Tube | 12 |
| Fiber Identification | Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua |
| OD of Tube | 2.0±0.1 mm |
| Thickness of Tube | 0.30±0.05 mm |
| Color of Tube | Blue Orange Green Brown Grey White Red Black |
| CSM: FRP | 2.5 mm |
| PE Coated | 3.4 mm |
| Water Blocking Material (1) | Water Blocking Yarn and Water Blocking Tape |
| Ripcord (1) | Polyester * 1-Red |
| Thickness of Inner Sheath | Nominal 0.9 mm |
| Inner Sheath Material | MDPE |
| Water Blocking Material (2) | Filling compound |
| Ripcord (2) | Polyester * 1-Red |
| Peripheral Strength Member | Corrugated Steel Tape |
| Thickness of Outer Sheath | Nominal 1.9 mm |
| Outer Sheath Material | HDPE |
| OD of Cable | 14.5±0.5 mm |
| Cable Weight | 180kg/km |
