Factory Price! Aeration Ejector for Water Aeration and Oxygenation Treatment for Gas Liquid Mixing

Factory price!Aeration ejector for water aeration and oxygenation treatment for gas liquid mixing

Graphic

In the submersible jet aerator, the water flow generated by the submersible pump passes through the nozzle to form a high-speed water flow, and a negative pressure is formed around the nozzle to inhale air, which is mixed with the water flow through the mixing chamber, and produces a water-air mixed flow in the horn-shaped diffuser, which is jetted out at high speed. The water stream with many bubbles is swirled and stirred in a larger area and depth of water to complete aeration, and its shaft power does not change with the change of submergence depth, and the amount of air intake can be adjusted. The submersible jet aerator can be used in pools where the water level changes greatly

 "EDON" Jet aerator / Ejector advantage:

1) High efficiency of oxygenation , and the efficiency can reach 35% when the water depth is 8 meters

2) It can produce um bubbles

3) Large service area, makes the whole aeration pond was in eddy current state without aeration dead angle

4) Gas liquid mixing ratio 4:1

5) With aeration and mixing function,can just mixing if needed

6) Energy saving

7) Simple structure, maintenance free, non clogging, allowing particles with diameter of 15mm to pass through

8) Suitable for deep water aeration,high sludge activity