Audited Supplier
Name :Stainless Steel Wire Rope-Black
Raw Materials:201/304/316/316L
Const.:1*7,7*7,1*19,7*19,6*7+FC,6*7+IWS,6*19+IWS,1*37,6*19+FC,18*7+FC,19*7,6*37+FC,6*12+7FC,7*37,6*36WS+FC,6*36WS+IWRC,etc.
Diameter:from 0.3MM to 40MM
Standards:GB,AISI,ASTM,DIN,EN,JIS,etc
Tensile strength :1570/1670/1770/1870/1960 N/MM2
Applications:Lifting,slings,spring,fishing,brake line,medical treatment,motor control line,etc.
| Name | black oxide stainless steel wire rope |
| Raw Materials | 316/316L |
| Construction | 7X7, 7X19, etc. |
| Diameter | 0.3mm to 40mm |
| Standards | GB,AISI,ASTM,DIN,EN,JIS,etc |
| MIN. breaking load | 1570/1670/1770/1870/1960 |
| Applications | Cable railing, Lifting, slings, brake line etc. |
Q: What is black oxide handling stainless steel wire rope?
A: Black oxide handling stainless steel wire rope is a type of wire rope that has been treated with a black oxide coating to improve its appearance and corrosion resistance.
Q: How should black oxide handling stainless steel wire rope be stored?
A: Black oxide handling stainless steel wire rope should be stored in a dry, well-ventilated area away from moisture and chemicals that could cause corrosion. It should be kept off the ground and away from sources of heat or direct sunlight.
Q: How should black oxide handling stainless steel wire rope be handled?
A: When handling black oxide handling stainless steel wire rope, it is important to wear gloves to protect your hands from the black oxide coating. Avoid dragging the wire rope across rough surfaces or sharp edges, as this can damage the coating and reduce its corrosion resistance.
Q: Can black oxide handling stainless steel wire rope be used in outdoor applications?
A: Yes, black oxide handling stainless steel wire rope is suitable for outdoor applications, as the black oxide coating provides additional protection against corrosion. However, it is important to regularly inspect the wire rope for signs of wear or damage and replace it if necessary.
Q: How should black oxide handling stainless steel wire rope be cleaned?
A: Black oxide handling stainless steel wire rope can be cleaned with a mild detergent and water solution, followed by a rinse with clean water. Avoid using harsh chemicals or abrasive cleaners, as these can damage the black oxide coating. Dry the wire rope thoroughly before storing it to prevent corrosion.
