Audited Supplier
FJCO-H10-4S
After-Service Is Provided
12 Months
Combined
Convective
Strap
Air
Atmospheric Pressure
Multistage
Fjco-H10-4s
+/- 1 Degree Celsius
0.3-3.0m/Min
Class100
SUS430# Stainless Steel
Baked Enamelled Steel Plate
Fiberglass Wool
Circle Fan
Heating Section 2000mm Each
+40~200ºC
Pet-Film&Coverlen
± 3 ºC
FanQi
Plywood Case Meets The International Standard
multistage
Kunshan, China
Product Description
| Other Specification | |
| Conveyor system | The bottom surface touches the conveyor mesh during handling. There is no contamination and scratching of the material during the conveying process. The products are transported smoothly in the furnace without shaking and jamming. |
| Temperature range | Max: 40 ºC -200 ºC, commonly used below 160 ºC, * temperature 200 ºC. |
| Temperature uniformity | Temperature uniformity of not more than ± 3 ºC (except near the feed, discharge port), constant temperature stabilisation of the empty furnace left, middle and right three points through the furnace test, the start of the air supply motor are starting to send |
| Heating device | The use of medium-wave quartz electric heaters, fast heating and drying firm. |
| Air supply mode | Hot air blowing from top to bottom, special air circuit structure design, the temperature inside the box is uniform. |
| Conveyor system | Adopting Tai Li speed reducer motor drive through the reducer, frequency converter, gear chain drive, composed of a complete transmission system. |
| Temperature outside the machine | Below 45ºC. |
| Control system | Siemens PLC system + Siemens touch screen can be connected to the MES system. |
| Weight | Sbout 800Kg/m |
| Power supply | AC380V 3Φ 50HZ |
1. Exhaust volume MAX: 10.0M3 / Min (customers to provide the receiver outside the furnace) centralised exhaust pipe diameter ∮ 100mm * 6PCS for easy on-site installation, and the appearance of the neat and clean, exhaust temperature of 150 ºC or less.
2. PET-FILM&COVERLEN, mesh belt width 1000mm, beige special temperature and wear-resistant rubbing, 04#25 specifications, bullnose connector. The height of the conveyor surface of the mesh belt from the ground is 980±20mm.
3. The bottom surface touches the conveyor mesh during handling. There is no contamination and scratching of the material during the conveying process. The products are transported smoothly in the furnace without shaking and jamming.
4. 128K high-density aluminosilicate environmentally friendly thermal insulation cotton (white ceramic cotton) door using high-temperature-resistant silicone forced tightly sealed, no leakage elasticity.
5. Phase sequence error protection, overload protection, control line protection, abnormal emergency stop, over-temperature protection.
6. Highly customisable.
7. Best after-sales service: one year free parts maintenance.
If you are interested in any of our company's programs, please contact me or send me an e-mail!
For more product information, please go to the homepage.
