Audited Supplier
| Beipeng high-intensity floor heating extruded XPS board | ||||||||||
| Thermal Conductivity | W/m2·K | ≤0.028 | ||||||||
| Dimensional stability | % | ≤1.5 | ||||||||
| Compressive strength | kPa | 200~1000 | ||||||||
| Water absorption | % | ≤1.5 | ||||||||
| Combustion performance | B1 | |||||||||
| Density | kg/m2 | 22-35 | Customization is accaptable | |||||||
| Size | mm | 1200*600 | ||||||||
| Thickness | mm | 20 | 25 | 30 | 40 | 50 | 60 | |||
| Surface | Aluminum Foil | Pipe Groove | Peeled | With Epidermis | ||||||
1. Beipeng extruded board process-CO2 foaming process
2. The cells are small and uniform in size
3. The link wall between the cells is uniform in thickness
4. High closed cell rate
5. No secondary foaming phenomenon
6. No residual solids and no foaming
All kind of insulation buildings.
Beipeng underfloor heating panel is
1. High compressive strength from 200kpa~1200kpa, normally 300kpa (1SQM hold 30tons weight)
2. Waterproof, fireproof, soundproof building materials
3. Various insulation board thickeness and aluminum layer thickness for differnt budget
4. Do small influence to room space
5. Dry installation environmentally, support DIY cutting and all products are recycle.
6. Quick handle, two labour can finish 1000SQM room within two hours
7. Raw material free of CFC, HCFC, HBCD, approved by SGS and EN13164, and we are holding ISO14001, ISO9001 and ISO45001.
