Audited Supplier
75mm
Online Support
2 Years
Webbing Sling
Polyester
5T
Welding Type
Flat Eye
Hemp Core
Lever
Flat
GS, CE, RoHS, ISO 9001
Customized
Pallet
Available
5:1 6:1
En1492-1
CE, GS
3 Ton
100% Polyester
7.5cm
PE Shrink Wrapped
as Required
Webbing Sling
High
Anti-Corrosion
Flexible
Mine
Huiyu
Carton
1-100 ton
Hebei, China
3923900000
Product Description
Introduction:
Webbing sling is produced from top quality synthetic fiber (100% PES), nylon, and polypropylene fiber by the advanced international level of weaving technology and equipment in various sewing methods, they are mainly used for various occasions of hoisting, the products comply with the standards GB/T8521-1997, EN1492-1:2000.
Features:
* It can be divided into single layer or multi-layer, and the sewing method is various.
* Size can be determined by the customer's request.
* The bearing surface is wide, which can reduce the pressure of the surface load.
* When lifting objects with smooth and fine outer surfaces, it will not hurt the objects to be lifted.
* There are various ways to hoist.
* High strength to weight ratio.
* It can be equipped with anti-wear protective cover and anti-cut protective cover.
* It has a unique label and uses international standard colors to distinguish the tonnage of the load, even if the sling is worn and easy to identify.
* Light and soft, easy to use in small spaces.
* The surface can be hardened by PU to enhance wear resistance.
* No electricity, no risk of electric shock.
* Conforms to European standard EN 1492-1+A1: 2008 and Chinese industry standard JB/T8521-2007.
Material:High-strength polyester (100% PES)
Advice:
1.Before use, select the correct flat webbing or round sling with regard to its application, capacity and the surface conditions of the load.
2Please examine the condition of the webbing sling or round sling.
3.The permissible capacity of the slingsmust not be exceeded.
4.Never shorten a sling by knotting.
5.Flat webbing slings and round slings must not be placed around sharp edges or over rough surfaces, use wear sleeves and edge protectors where necessary.
6.Flat webbing slings should be applied in such a way, that the carry the load over the full sling width.
7.Loads may only be placed on slings if damage is precluded. Do not drag slings fromunder load, position the sling correctly to ensureeasy removal after use.
8.Position slings in such a way, that they hold the load securely.
9.In "chokef" lifts, only use flat webbing sling with rein forced eyes.
10.Using flat webbing slings with eyes, the eye opening angle should not exceed 20.at the connecting point.
Webbing sling is produced from top quality synthetic fiber (100% PES), nylon, and polypropylene fiber by the advanced international level of weaving technology and equipment in various sewing methods, they are mainly used for various occasions of hoisting, the products comply with the standards GB/T8521-1997, EN1492-1:2000.
Standard | ISO4878, EN1492-1,JB/T8521 |
The products comply with CE, GS safety requirements | |
Material | Polyester, Polypropylene, Nylon |
Safety factor | 4:1, 5:1, 6:1 |
Length | 2m-100m |
Working load | 1T-50T |
Elongation | Ultimate working elongation <2% Breaking elongation <12% |
Temperature range | - 40 °C - 100 °C |
Features:
* It can be divided into single layer or multi-layer, and the sewing method is various.
* Size can be determined by the customer's request.
* The bearing surface is wide, which can reduce the pressure of the surface load.
* When lifting objects with smooth and fine outer surfaces, it will not hurt the objects to be lifted.
* There are various ways to hoist.
* High strength to weight ratio.
* It can be equipped with anti-wear protective cover and anti-cut protective cover.
* It has a unique label and uses international standard colors to distinguish the tonnage of the load, even if the sling is worn and easy to identify.
* Light and soft, easy to use in small spaces.
* The surface can be hardened by PU to enhance wear resistance.
* No electricity, no risk of electric shock.
* Conforms to European standard EN 1492-1+A1: 2008 and Chinese industry standard JB/T8521-2007.
Flat Webbing Slings are lightweight and are less likely to scratch or damage the load being lifted.
Length: According to customer's requirements
Custom made lifting solutions for non-standard applications
According to the customer's requirement, the safety factor of sling has4:1, 5:1,6:1, its load range is from 0.5t to 50t Which is produced according to international standard, for color and load capacity.
According to the customer's requirement, the safety factor of sling has4:1, 5:1,6:1, its load range is from 0.5t to 50t Which is produced according to international standard, for color and load capacity.
Advice:
1.Before use, select the correct flat webbing or round sling with regard to its application, capacity and the surface conditions of the load.
2Please examine the condition of the webbing sling or round sling.
3.The permissible capacity of the slingsmust not be exceeded.
4.Never shorten a sling by knotting.
5.Flat webbing slings and round slings must not be placed around sharp edges or over rough surfaces, use wear sleeves and edge protectors where necessary.
6.Flat webbing slings should be applied in such a way, that the carry the load over the full sling width.
7.Loads may only be placed on slings if damage is precluded. Do not drag slings fromunder load, position the sling correctly to ensureeasy removal after use.
8.Position slings in such a way, that they hold the load securely.
9.In "chokef" lifts, only use flat webbing sling with rein forced eyes.
10.Using flat webbing slings with eyes, the eye opening angle should not exceed 20.at the connecting point.
FAQ
Q1: What kind of company are you?
A1: We are not only a factory; we are also a company dedicated to the development of original design and tools and accessories of transportation, logistic, off-road, recovery, construction machine and agriculture machines.
Q2: Could you accept the customization of order?
A2: We have a well-rounded team to offer the customized service; we will design according to idea, logo, picture, or something you showed.
Q3: What are your terms of payment?
A3: We could accept 30% as deposit, and 70% before delivery. We'll provide the photos and video of the products and packages before paying the balance.
Q4: Can you provide the sample and how samples will be shipped?
A5: Yes, the sample will be shipped in 2 working days if it is standard product. The sample will be shipped by sea, land and air express, such as EMS, UPS or FedEx, which will accord your requirement.
Q5: Do you test all your goods before delivery?
A7: Yes, we have 100% test before delivery, some product could bring a test report with you
Q6: How long is your lead time?
A8: We are the company have inventory in warehouse. so we could shipped immediately if there is not very big or customized order.
A1: We are not only a factory; we are also a company dedicated to the development of original design and tools and accessories of transportation, logistic, off-road, recovery, construction machine and agriculture machines.
Q2: Could you accept the customization of order?
A2: We have a well-rounded team to offer the customized service; we will design according to idea, logo, picture, or something you showed.
Q3: What are your terms of payment?
A3: We could accept 30% as deposit, and 70% before delivery. We'll provide the photos and video of the products and packages before paying the balance.
Q4: Can you provide the sample and how samples will be shipped?
A5: Yes, the sample will be shipped in 2 working days if it is standard product. The sample will be shipped by sea, land and air express, such as EMS, UPS or FedEx, which will accord your requirement.
Q5: Do you test all your goods before delivery?
A7: Yes, we have 100% test before delivery, some product could bring a test report with you
Q6: How long is your lead time?
A8: We are the company have inventory in warehouse. so we could shipped immediately if there is not very big or customized order.
