Audited Supplier
DP-A+100
Trauma Operation
Steel
Reusable
CE, ISO13485
Adult
Multi Function Canulate Drill
Black
1800mAh
135 Centigrade
Standard Package
China
Product Description
Factory Sale AO Orthopedic Bone Drill Surgical instruments surgical electric medical drill
Application
1. Imported Motor
2. No Limit speed-changing
3. High Coaxiality, Low-Noise
4. Ergonomic design
5. Dual Function: drill chuck, k-wire; flexible reamer
6. Whole unit can be autoclavable at 135 °C (Improved type ≤ 155 °C ),with 1.6Mpa
2. No Limit speed-changing
3. High Coaxiality, Low-Noise
4. Ergonomic design
5. Dual Function: drill chuck, k-wire; flexible reamer
6. Whole unit can be autoclavable at 135 °C (Improved type ≤ 155 °C ),with 1.6Mpa
Specification
Parameter | Data |
Battery type | Ni-MH battery |
Battery capacity | 1800mAh |
Operation(V) voltage | 14.4V |
Radial circle run-out | ≤0.1mm |
Axial movement | ≤0.5mm |
Biggest drill bit diameter | 8mm |
Diameter of Cannulation | 4.5mm |
Sterilization | ≤135ºC |
Noise | ≤75dB |
NOTE:
1. Sterilize temperature ≤ 135 °C (Improved type ≤ 155 °C ), if the temperature is over 135 °C, the motor could be damaged.
2. Normal bone drill can only hold drill bits less than 6mm, acetabulum reaming drill with big torque,rpm is around 300, canulate drill is used with nail or K wire, rpm is around 600.
3. The battery need to be get out of the power tool after surgery. Otherwise the small automatic discharge of the electric will make the life of the battery short.
4. The battery cannot be sterilized, it is not autoclavable.
5. The cranial bur must be washed right after the surgery by purger in order to avoid the blood stick in the bur, make sure it
stays dry.
6. The battery space in the handpiece of the tool should not have any water, after sterilization.
7. The cranial bur blade is made of medical stainless steel, in order to avoid broken, so it is flexible and not very hard, it is
easy to be attrite, we suggest each blade only use for 1 surgery.
2. Normal bone drill can only hold drill bits less than 6mm, acetabulum reaming drill with big torque,rpm is around 300, canulate drill is used with nail or K wire, rpm is around 600.
3. The battery need to be get out of the power tool after surgery. Otherwise the small automatic discharge of the electric will make the life of the battery short.
4. The battery cannot be sterilized, it is not autoclavable.
5. The cranial bur must be washed right after the surgery by purger in order to avoid the blood stick in the bur, make sure it
stays dry.
6. The battery space in the handpiece of the tool should not have any water, after sterilization.
7. The cranial bur blade is made of medical stainless steel, in order to avoid broken, so it is flexible and not very hard, it is
easy to be attrite, we suggest each blade only use for 1 surgery.
