Audited Supplier
Square Water Storage Tank Advantages
(1) Strong resistance to corrosion
(2) Reasonable structure design
(3) All welded on-site combination. High strength, good sealing,
prevent secondary pollution of water quality
(4) Light weight, that is one half of ordinary steel plate water tank
(5) Easy to install
(6) Clean, bright, beautiful appearance
FRP/GRP/SMC panel's main raw materials are resin and glass fiber roving.Using the hot press machine to manufacture different thickness of panels;its thickness is depends on the weight of raw material. FRP/GRP tank is the most popular in Asia,MENA,America countries etc.
TECHNICAL DATA
PANELS
MATERAL
1.Food grade unsaturated polyester resin
2.Alkali free twist glass fiber roving
3.Thickener(MgO),intiator(curing agent),cross linking agent, ect
SIZE&WEIGHT
1.The size of FRP/GRP panel are produced by standard mould, having size 1*1m.1*0.5M,0.5m*0.5m;
2.The panel thickness is depends on the tank height
3.The available highest height is 5 meters(Add extermal C channel or l-beam reinforcement is needed for 4m and 5m height).
FRP Water Tank Specification | ||||||
Material | Size | Panel Shape | Thickness | Remarks | Volume | Color |
GRP FRP | 500mm- 2000mm | Square or rectangle with a convex in centre | 4mm- 25mm | thickness tolerance:+-0.2 mm | 0.125 - 5000 cubic meter | ivory white |
Sealing Material | 1, Black or Milk White(food grade), size depends on actual situation. 2, Plugging 3, Glass cement | |||||
Metal Structure | 1,Channel steel base; 2,angle iron; 3,Bolt&nut; 4,flange; 5,support and tie piece; 6,ladder; 7,lacing board, etc. | |||||
No leaks after being filled with water. Deformation after being filled with water: Wall maximum deformation was no more than 1.0% of the tank’s bottom center height. Maximum deformation was no more than 10 mm. | ||||||
Tank height(m) | Thickness of each panel | ||||||
bottom | 1st layer | 2nd layer | 3rd layer | 4th layper | 5th layer | Roof | |
1.0 | 0.5*(1-6) | 0.5*(1-6) | 0.5*(1-4) | ||||
1*(1-7) | 1*(1-6) | 1*(1-4) | |||||
1.5 | 0.5*(1-7) | 0.5*(1-6)
| 0.5*(1-6)
| 0.5*(1-4) | |||
1*(1-7)
| 1*(1-7)
| 1*(1-4) | |||||
2.0 | 0.5*(1-8) | 0.5*(1-7) | 0.5*(1-6) | 0.5*(1-4) | |||
1*(1-8) | 0.5*(1-7) | 1*(1-6) | 1*(1-4) | ||||
2.5 | 0.5*(1-9) | 0.5*(1-9) | 0.5*(1-7) | 0.5*(1-5)
| 0.5*(1-4) | ||
1*(1-9) | 1*(1-9) | 1*(1-8) | 1*(1-4) | ||||
3.0 | 0.5*(1-10) | 0.5*(1-10) | 0.5*(1-7) | 0.5*(1-6) | 0.5*(1-4) | ||
1*(1-11) | 1*(1-11) | 1*(1-8) | 1*(1-6) | 1*(1-4) | |||
3.5 | 0.5*(1-11) | 0.5*(1-11) | 0.5*(1-9) | 0.5*(1-7) | 0.5*(1-5)
| 0.5*(1-4) | |
1*(1-12) | 1*(1-12) | 1*(1-12) | 1*(1-8) | 1*(1-4) | |||
4.0 | 0.5*(1-12) | 0.5*(1-12) | 0.5*(1-9) | 0.5*(1-8) | 0.5*(1-6) | 0.5*(1-4) | |
1*(1-13) | 1*(1-13) | 1*(1-12) | 1*(1-9) | 1*(1-7) | 1*(1-4) | ||
5 | 0.5*(1-15) | 0.5*(1-15) | 0.5*(1-10) | 0.5*(1-8) | 0.5*(1-7) | 0.5*(1-5) | 0.5*(1-4) |
1*(1-17) | 1*(1-17) | 1*(1-12) | 1*(1-12) | 1*(1-10) | 1*(1-8) | 1*(1-4) | |
