Factory Supply Rebar Steel Deformed Wire Mesh Panels Concrete Stucco Ribbed Wire Netting Steel Reinforcing Concrete Slab Mesh

Concrete reinforcing mesh steel welded wire mesh galvanized mesh:

Concrete Reinforcing Mesh also known as concrete wire mesh,concrete mesh,steel reinforcing mesh,welded wire reinforcement,welded mesh fabric reinforcement. It is manufactured using cold-rolled deformed wire, electrically resistance welded at the intersections of the longitudinal and transverse wires at the required mesh spacing with minimal loss of strength and cross-sectional area.

Specification of concrete reinforcing mesh:
Type: Concrete mesh heavy type (diameter of rods above 12 mm) and light type (diameter of rebar rods from 3 mm up to 10 mm).
Material: stainless steel rebar rods, galvanized steel rods (with its excellent resistance to corrosion, galvanized reinforcing mesh can be successfully used in wet conditions).
Mesh shape: rectangular or square.
Distance between rods: 100, 200, 300, 400 and 500 mm.
Mesh sheet width: 650 mm - 3800 mm.
Mesh sheet length: 850 mm, 6 m, 9 m, 12 m.
Standard reinforcing steel mesh sheet sizes are: 6.0 m × 2.4 m. And 4.80 m × 2.4 m, 3.6 m × 2 m, 2 m × 4 m also offered

Application
Welded mesh reinforcement is made from metal rods with 3 to 40 mm diameter. These metal rods are perpendicular bonded by spot welding. Concrete reinforcing mesh used in residential, industrial and road construction, such as concrete footpaths and industrial and commercial ground slabs, precast panel construction and residential slabs and footings.