Audited Supplier
Product composition
This fluorine release film is made of transparent PET (polyester film) as the base material and coated with fluorosilicone resin on one side
Product characteristics
1. The coating is uniform and the release force is stable;
2. Small thickness tolerance and high transparency;
3. Low heat shrinkage and good flatness;
4. The residual adhesion rate is high (≥ 90%), which has no impact on the performance of the bonding material and no pollution;
| Base material | PET | ASTM D3652 |
| Color | transparent | / |
| Appearance | No dirt, no wrinkles, no scratches | |
| Release agent | Silicone oil |
Product specification
1. Width: 1060mm (can be customized according to customer requirements)
2. Length: 200-4000m (slitting and rewinding according to customer requirements)
3. Inner diameter of coil core (paper tube or plastic tube): 3 inches (76.2 mm) or 6 inches (152.4 mm)
Scope of application
It is applicable to silicone products (such as the bottom film of silicone products such as three-layer hot-pressing film, golden finger tape, high-temperature green tape, etc.; the die-cutting and punching of silicone products such as silicone protective film, PI tape, silicone double-sided adhesive tape, etc.).
Product packaging
1. Products are generally packed in cartons and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. It can also be packaged according to the customer agreement
instructions
1. Static electricity may be generated during unwinding or rewinding during use. The electrostatic layer will damage the release layer and lead to poor peeling. If necessary, anti-static treatment can be carried out on the back or static elimination equipment can be used to eliminate static electricity.
2. In order to obtain the best use effect, it is recommended to use this product within 3 months from the purchase date;
3. It must be retested before use after expiration;
4. Recommended storage conditions: avoid direct sunlight, store under the indoor ambient temperature of 25 ºC ± 2 ºC and humidity of 60% ± 10%.
5. When using this product, please fully study whether the purpose (purpose, condition) is suitable or not in advance, and decide whether the product conforms to its standard by yourself. The content beyond the specification cannot be guaranteed.
About us
ShenZhen RuiHua coating Technology Co., Ltd. was established in 2017.It is a comprehensive high-tech enterprise specializing in the R&D, production and sales of high-end adhesive materials, thermally conductive materials, protective films and precision die-cutting.It has a number of utility model patents and passed I S O 9 0 0 1 quality Management system , with rich research and development technology, advanced intelligent high-speed coating machine, rewinding machine,laminating machine, slitting machine and die-cutting combination line, rich coating Fabric, die-cutting technology and first-class testing equipment; its series of products have passed third-party certification and meet environmental protection standards in all walks of life; products are widely used in electronics, circuit boards, automobiles, computers, batteries, medicine, mobile phones, spraying, insulation , Die-cutting, electroplating, home appliances and other fields.
Q: Are you a manufacturers or trading company?
A: We are a manufacturers,welcome to visit,we can show you our company and hope for a long time corporation with you.
Q: How many the warranty?
A: Our warranty is 90 days after goods have been received.
Q: Do you provide free sample?
A: Yes, we can provide two rolls of samples for free, but you need to cover the courier cost.
Q: What is your payment method ?
A: We prefer to T/T,30% deposit and the balance 70% paid off before shipment.
Q: What kind of information we need before place your order?
A: Thickness, Width, Length, Application, Adhesive type,Color,Peeling force.
