Fancy Yarn Sequin Knitting Machine 8 Needles Sequins Spangle Yarn Making Machine

1. Place the machine in a suitable location in the workshop and leave enough space for workers to operate. Install the machine's cover and rear support. 2. Connect the 220V-50HZ single-phase power supply and turn on the light strip. 3. Choose suitable blades and tubes. 4. Prepare yarn and string of sequins or beads. 5. Place the yarn on the spindle and the sequins string on the machine up cover guide wheel. 6. The thread of the sequins string passes through the tube and blade, and is guided through the spindle hole by a spring. The end of the yarn is also guided through the spindle hole, tied in a knot, and the yarn can be used with 2-3 strands or more. 7. Wind the knotted end of the yarn around the lower guide wheel and wrap it around the paper tube near the down bobbins. 8. Set the display menu for twist, speed, and product type, select the product, set the interval, and confirm "OK",then by pressing the green button to run. 9. During operation, if you want to stop one of the spindles, you can control the brake until the spindle stops completely, then connect the wires or change the yarn. 10. If you want to change the display settings, press the green button to turn off the machine until it stops completely. Re-set the display and press "OK" to restart the green run button.