Audited Supplier
ZJR15-2315
1 Year
Horizontal Drilling Machine
Horizontal
CNC
6
<50mm
Automatic
High Precision
GS, CE, ISO 9001
New
15ton
1500mm
zonjet
Wooden Box
CE, GS, ISO9001
Guangdong, China
8459210000
Product Description
ZJR series CNC deep-hole drilling machine is automatic and multifunctional, majoring in deep-hole drilling and cutting, while milling function is also professional. With the modern industry advanced technology, the performance, accuracy, processing range, operating mode and working efficiency are in the international advanced level.
1.FANUC 0i -MD CNC system: stable performance, convenient operation programming, perfect and punctual after-sales service.
2.FANUC servo motor for six coordinate axis and main axis: good characteristic and perfect low speed performance.
3.With high-precision ball screw bar and rolling linear guide, the operating components make positioning accurately.
4.Remote control device is adopted in cooling system. Depends on the hole size, materials, chips and required precision, adjusting the flow rate and pressure can optimize the cooling result.
5.ZJR series CNC deep-hole drilling machine is mainly used for extremely difficult processes of deep-hole in mold industry. It's spoken highly of its high-efficiency, low-cost, humanized technological process.
Technical Specifications of
ZJR Series Six-Axis CNC Deep-hole Drilling Machine Tool
Due to the continuous improvement of products, specifications and pictures are for reference only. For details, please visit our website: http://zonjet.en.made-in-china.com
1.FANUC 0i -MD CNC system: stable performance, convenient operation programming, perfect and punctual after-sales service.
2.FANUC servo motor for six coordinate axis and main axis: good characteristic and perfect low speed performance.
3.With high-precision ball screw bar and rolling linear guide, the operating components make positioning accurately.
4.Remote control device is adopted in cooling system. Depends on the hole size, materials, chips and required precision, adjusting the flow rate and pressure can optimize the cooling result.
5.ZJR series CNC deep-hole drilling machine is mainly used for extremely difficult processes of deep-hole in mold industry. It's spoken highly of its high-efficiency, low-cost, humanized technological process.
Technical Specifications of
ZJR Series Six-Axis CNC Deep-hole Drilling Machine Tool
| Items | ZJR15-2315 | |||
| Processing Capacity | Diameter of the Hole for Gun Drill | 3~35 mm | ||
| Maximum Depth of the Hole for Gun Drill | 1500 mm | |||
| Processing Range | (X)Processing Range (from Left to Right) of the Working Table | 2300 mm | ||
| (Y) Processing Range of Sliding Table | 1500 mm | |||
| (Z) Processing Range of Column | 800 mm | |||
| (A)The Rotary Angle of Ram | 15, 25The Main Axis Turns upward 15 degrees, and down to 25 degrees | |||
| Main Axis | Taper Hole of Main Axis | BT50 | ||
| Maximum Speed of Main Axis | 4500 rpm | |||
| Power | Main Axis Motor | 11 kw/18.5kw | ||
| X X Axis Servo Motor | 38 N.m | |||
| Y Y Axis Servo Motor | 38N.m | |||
| Z Z Axis Servo Motor | 38 N.m | |||
| W W Axis Servo Motor | 22 N.m | |||
| A A Axis Servo Motor | 38N.m | |||
| B B Axis Servo Motor | 38 N.m | |||
| Total Power | 70kw | |||
| CNC Index Table | Burdening | 15 ton | ||
| (×)Measurement | 1800×2000 mm | |||
| Cooling System | ()Pressure Range of Cooling Liquid | 2~15 MPa(Set 2~9 MPa) | ||
| ()Flux of Cooling Liquid | 6~85 L/min | |||
| Measurement & Weight | (×)Floor Area of Machine Tool(Length*Width) | 8300×7300 mm | ||
| Maximum Height of Machine Tool | 4000 mm | |||
| Wight of Machine Tool | 30ton | |||
| System | CNC System | FANUC 0i-MF | ||
| Milling Function | Milling Range | 1900mm | ||
Due to the continuous improvement of products, specifications and pictures are for reference only. For details, please visit our website: http://zonjet.en.made-in-china.com
