Audited Supplier
HCCCF
Body
Self Healing, Sand Proof, Privacy Protection, Heat Insulation, Explosion-Proof, Color Changing, Anti Scratch
Support
2 Years
Tinted Film
PVC
Rainbow Emerald
7.5mil
Strong Removable Adhesive
Removable
Glossy/Matt
Body Stickers
HIGHCOOL
Neutral Packaging/Customized Packaging
15.2*17m
China
3926909090
Product Description
Product Decription Features:
1) Very light, thin, but with excellent ductility and flexibility.
2) 3D graphic contrast, hi-touch embossed finish, 3D-Effect, very stylish!
3) High weather resistance to (acid rain, hailstone, heavy snow, sandstorm, etc).
4) Water proof, UV and FR.
5) Seamless for whole car wrapping.
6) Can be applied to all the common car paints.
7) The film is embossed, resembling. Reflect lights as your expectation and change highlights of the pattern depending on the viewing angle.
8) Easy to clear with soap and water.
9) Air bubble removal. Can be dry paste!
10) High stretchable ability. Easy to apply on any surface.
11) Filter harmful light ray.
Installation Tips:
1) Clean the area thoroughly. Measure and place the sticker in the desired location. Put a piece of masking tape
on the sticker to hold it in place. Hint: For best results do not install the sticker in extreme heat or cold. surface
contaminants will cause imperfections.
2) Lift the sticker up and peel the white paper backing off the sticker. Be careful not to pull the masking tape off.
3) Slowly lower the sticker and rub it in place with a scratch board or similar item. Hints: Using a soft rubber
squeegee will help smooth out bubbles and wrinkles
4) Wait a few minutes then slowly peel the clear cover off at an angle. Be very careful not to pull the sticker off
the surface. If the sticker pulls away from the surface repeat step
Specification
| Product Name | Car Wrap Film |
| Material | PVC |
| Size | 1.52*17/18/customization |
| Place of Origin | Shanghai,China |
| Position | car body |
| Brand Name | HIGHCOOL |
| Warranty | 2YEARS |
| MOQ | 1 ROLL |
Company Introduction
FAQ:1. Are you manufacturer or trading company?
We are a professional manufacturer who was found in 2010, we have exported to more than 100 countries.
2. How could I get the sample?
Sample is FREE. Wel,l you need to pay for the DHLcost or you could say courier charge.
And we need you tell us what size you want? A4, 1x2m, or others?
3. Could we have our Logo or company name printed on your package?
Yes. 1) Usually we will request half container at least for supporting this.
2) If you need to print your logo on the release paper, the cost for new mould charge is usd280.00
3) If you need to print your logo on the outside carton box, We can do. But maximum 3 colors.
4. Can you offer us OEM products?
Yes, we could. like change color, logo printing, package, etc. As per your request.
5. What is the standard package for the products usually?
Hard Carton Box.(Mostly just brown color. If you need to do white color, also ok. ).
6. How about the delivery time?
This depends on your quantity and how many items you order. But usually in 3 weeks.
7. What is your payment term usually?
1)T/T: Normally 30% deposit in advance,70% balance before loading or against BL copy.
2) L/C at sight(Irrevocable).
8. What is your shipment way usually? By air or by sea?
As our goods are very heavy, usually we ship our goods by sea. We will send samples by air.
9. How you ensure you will supply us the good quality products?
1) We will inspect all our raw materials very strictly after they come in.
2) After our semi-finished products finished, we will do 100% full inspection.
3) During the finished production, we have inspector to check the goods beside the maichine in 24 hours,
4) After the finished products comes out, we will do:
A) Full printing test to see whether it could absorb the ink.
B) We will check the size whether all ok.
C) We will open 5-10% quantity to check whether any discrepany happened on the surface.like dot, dirt.
D) We will examine the color, weight, initial adhesion, last adhesion by our precise instruments.
