Audited Supplier
FDK01
Nij Iiia
High Cut
1.49kg
9mm
Y Type
61-64CM
FDA, Nij
Knob Type
Military and Army
Fox Armour
FOX ARMOUR
Carton Box
30*25*25cm
Zhejiang, China
Product Description
THE BALTIC CASH, model "FAST LE HIGH CUT HELMET"
1.2. Night vision goggle mount, "L3 Insight Technology" model, model "AN / PVS-15" - 1 or equivalent glasses with 2 security elastic lines;
1.3. System extender, model "CBRN Mask Extender", for joint use of "M95" gas mask or equivalent;
- Purpose: Provide reliable protection for employees from hits and bullets, with increased mobility and functionality. Accessories of helmet:
1.2. Night vision goggle mount, "L3 Insight Technology" model, model "AN / PVS-15" - 1 or equivalent glasses with 2 security elastic lines;
1.3. System extender, model "CBRN Mask Extender", for joint use of "M95" gas mask or equivalent;
- Ballistic protection requirements for the helmet:
- The helmet has a level of protection IIIA in accordance with standards NIJ-STD-0106.01 and NIJ-STD-0108.01 or equivalent standards.
- To provide 100% protection against hits and rebounds of bullets with soft heart, pistols and revolver cartridges as follows:
- According to standard NIJ-STD-0106.01 or equivalent; 9mm para FMJ, bullet weight 8.0 ± 0.1 gram, test tube length 10 to 12 cm, initial bullet velocity 358 ± 15 m / sec. According to standard NIJ-STD-0108.01 or equivalent; 44 Magnum Lead SWC Gas Checked, bullet weight 15.55 ± 0.1 gram, test tube length 14 to 16 cm, initial bullet velocity 426 ± 15 m / s .;
- Provide shield protection in accordance with standards PS - 1118, MIL - STD - 662F or equivalent. Bulk weighing 1.1016 grams (17 grams FSP) at speed V50 = 670 m / sec.
- Requirements related to the purpose of the ballistic helmet:
- To ensure compatibility with the standard models of active anti-phonemes (Peltor mod. Com Tak), to have a base for mounting AN / PVS-15 night vision goggles, to allow the wearing of M95 or equivalent, to have side rails for mounting accessories and accessories.
- Have a quick release lock.
- There are four belt length regulators (from the underlying system) to position the helmet on the head.
- To have kinetic energy absorbing energy for the head and head, resistant to moisture and various temperature influences.
- The padded belt is lined with leather and offer the possibility of two wearing modes:
- Non-gastight helmet carrying mode - the strap covers the operator's front and bottom chin to securely secure the helmet;
- Breastfeeding mode - the strap extends with the "CBRN Mask Extender" to cover the operator's chin from the bottom, not interfering with the set gauge, but provides a sturdy attachment to the helmet.
- The materials from which the helmet has been made are flame-resistant according to ACH CO / PD 05-04: 2007 or equivalent (equivalence for protection under the same conditions and test methods).
