Audited Supplier
Fiberglas Chopped Strand Mat for FRP, automotive parts, ship/boat hull, pipe, tank, slides, FRP panels, etc, as a type of most commonly used fiberglass mat, owing to its excellent performance, has a wide range of applications, such ship bulding, auto-body, and other FRP products manufacturing.
| Code | Weight (g/m2) | Binder type | % L.O.I | % Moisture content | T. Strength (N) | |
| Vertical | Horizontal | |||||
| EMC100 | 100 | Powder/Emulsion | 4.0-12.0 | ≤0.2 | ≥80 | ≥80 |
| EMC120 | 120 | Powder/Emulsion | 4.0-12.0 | ≤0.2 | ≥80 | ≥80 |
| EMC150 | 150 | Powder/Emulsion | 4.0-12.0 | ≤0.2 | ≥100 | ≥100 |
| EMC200 | 200 | Powder/Emulsion | 4.0-12.0 | ≤0.2 | ≥100 | ≥100 |
| EMC225 | 225 | Powder/Emulsion | 2.0-8.0 | ≤0.2 | ≥100 | ≥100 |
| EMC300 | 300 | Powder/Emulsion | 2.0-8.0 | ≤0.2 | ≥120 | ≥120 |
| EMC380 | 380 | Powder/Emulsion | 2.0-8.0 | ≤0.2 | ≥120 | ≥120 |
| EMC450 | 450 | Powder/Emulsion | 2.0-8.0 | ≤0.2 | ≥150 | ≥150 |
| EMC600 | 600 | Powder/Emulsion | 2.0-8.0 | ≤0.2 | ≥150 | ≥150 |
1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products;
2.Excellent flexibility ensures good moldability with no spring-back at sharp corners;
3.Fast and consistent wet-out speed in resins and rapid air release reduce resin consumption, improving manufacturing costs;
4.The composite products have high dry and wet tensile strength and good transparency.
E-glass fiberglass chopped strand mat, owing to its excellent performance, is widely used in various applications, such as ship building, aviation manufacturing, auto manufacturing, home furnishing, etc.
Fiberglass chopped strand mat is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
