Audited Supplier
Paper Machine Clothes Tensioner / Adjuster / Guide / Sensor/ Stretcher
Sensor used for wire section, press felt, dryer screen and other parts, with the deviation correction device to achieve automatic correction of the felt fabric, avoid the deviation of the felt fabric, reduce the intensity of manual operation, protect the felt fabric from running off and damage or accidental damage to equipment and personnel.
1. Easy installation.
2. When the baffle is in the middle position, the stationary positioning state can be maintained.
3. There are two kinds of baffles, rotating and non-rotating, for choice.
4. Without the control box, it can work normally by connecting directly with the air source.
5, control valve position, can improve the sensitivity of action, so as to adapt to higher linear speed.
| Technical Parameters 1.Suitable for speed: 50-600m/min 2.Air Pressure: 0.25-0.50mpa 3.Gas consumption:≤100oL/H 4. Stainless steel roller swing: 30°C 5.Working temperature: -20C-80°C | Technical Parameters 1. Suitable for speed: 50-300m/min 2.Air Pressure: 0.25-0.50mpa 3.Gas consumption:≤100oL/H 4.Stainless steel roller swing: 30°C 5.Working temperature: -20C-80°C |
| Technical Parameters 1. Suitable for speed: 50-600m/min 2. Air Pressure: 0.20-0.30mpa 3.Gas consumption: ≤ 1000L/H 4.Stainless steel roller swing: 30°C 5. Working temperature:-20°C-80°C | Technical Parameters 1. Suitable for speed: 300-1500m/min 2. Air Pressure: 0.40-0.50mpa 3.Gas consumption: ≤ 1200L/H 4. Stainless steel roller swing: 32°C 5.Working temperature:-20C-100°C |
| Technical Parameters 1. Suitable for speed:50-600m/min 2. Air Pressure: 0.25-0.50mpa 3. Gas consumption: ≤ 100oL/H 4. Stainless steel roller swing: 30°C 5.Working temperature:-20C-80°C | Technical Parameters 1. Suitable for speed: 50-300m/min 2. Air Pressure: 0.20-0.30mpa 3. Gas consumption: ≤ 1000L/H 4.Stainless steel roller swing:30°C 5. Working temperature: -20°C-80°C |
