Audited Supplier
PA-01, AP-01, FeSiCr
All
20~35
Good~Best
0.7~1
4.0
AT&M
Drums and Pallet
D50=10um
China
Product Description
As a leading firm in atomization powder field, AT&M has been engaged in atomization technology over 40 years and can produce metal and alloy powders with various characters and sizes. As one of the biggest domestic bases that produce atomization powders, we possess advanced equipments and top-grade management. In 2003 we invested more than 5 million US dollars on building up a set of ultra-high pressure water atomization line and a set of imported vacuum gas atomization line. At present, AT&M has 8 pairs of atomization systems; The total production capacity is about 2000 tons per year.
Main Products:
High performance Fe-Ni, Fe-Si and Fe-Si-Al magnetic alloy powders
Pure metal and pre-alloyed matrix powders for metal bonded diamond tools
New catalyst powders for synthesizing single crystal diamond
Ultra-fine low alloy steel and stainless steel powders for MIM
High-speed steel and heat-resisting alloy powders
Thermal spraying powders
Main Products:
High performance Fe-Ni, Fe-Si and Fe-Si-Al magnetic alloy powders
Pure metal and pre-alloyed matrix powders for metal bonded diamond tools
New catalyst powders for synthesizing single crystal diamond
Ultra-fine low alloy steel and stainless steel powders for MIM
High-speed steel and heat-resisting alloy powders
Thermal spraying powders
| Typical Gas Atomized Alloy Powders | ||
| Products | Alloy mark | Granularity/ μ m |
| Magnetic alloy powders | CF-1~7 | 30~200 |
| Stainless steel powders | 304, 304L , 316,316L , 317L , 410L , 430L ,et,al | 15~200 |
| Amorphous alloy powders | M80S20,FCP | 25~200 |
| Diamond catalyst powders | FeNi30,NiMnCo,FeNiMn | 30~100 |
| Alloy powders for spraying | GHL-6-2,HL5,Co-11,N-11~60 | 30~200 |
| Typical Water Atomized Alloy Powders | ||
| Products | Alloy mark | Granularity/μm |
| Magnetic alloy powders | MPP,Hi-Flux,Sendust | 20~200 |
| Stainless steel powders | 304, 304L , 316,316L , 317L , 410L , 430L | 100~200 |
| Metal bond powders for diamond tools | Cu,Sn,Sn11~Sn60, Ni-45,Follow100~400 | 10~200 |
| Diamond catalyst powders | FeNi30,NiMnCo,FeNiMn | 20~100 |
