Audited Supplier
IF-C2Y5(B) Series-7
100 ~ 300VAC
64
-40ºC~+200ºC
±1ºC
0.1ºC
RS485/Modbus-RTU
This Sensor Does Not Need to Be Calibrated.
Wall Mounting Type
Inno
Wooden Box Packaging
Size: 530x480x680mm
China (Mainland)
Product Description
Undertake OEM/ODM services for OEM and OEM processing
The unit is designed for power applications and is ideal for hot spot temperature measurement of transformer windings for A new type of transformer internal temperature monitoring device that directly, real time, and accurately measures the temperature of hot spots such as windings can realize comprehensive monitoring of the inside of the transformer. In addition to having a wide temperature measurement range and accurate and reliable temperature measurement performance, it also has excellent anti-EMI/RFI (electromagnetic interference/radio frequency interference) characteristics, high-voltage insulation and anti-interference and other excellent performance.
Real-time and accurate monitoring of "hot spot" temperature during dynamic load operation can be realized. It solves the problems of low safety, poor measurement accuracy and failure of temperature measurement using traditional electrical temperature measuring instruments in the electromagnetic environment.
Basic parameters:
| Number of channels: | 7 (can be customized) |
| Temperature measurement range: | -40ºC~260ºC |
| Temperature measurement accuracy: | ±1ºC |
| Resolution: | 0.1ºC |
| Response time: | 2s/channel |
| Working temperature: | -20ºC~65ºC |
| Storage temperature: | -40ºC~70ºC |
| Relative humidity: | <95% (25°C) |
| Power supply: | AC220V(Customizable) |
| Communication interface: | RS485, 4~20mA, Ethernet port |
| Communication address setting: | 1~8 bit dial switch |
| Contact output: | 2 relay outputs, the contact capacity is AC220V/2A |
| Sensing probe: | used with optical fiber sensing probe |
| Power consumption: | ≤10W |
Customized OEM solutions for your industry,
We offer original equipment manufacturer (OEM) solutions in multiple vertical markets,
These markets rely on high-quality, stable, and carefully designed technologies tailored to their industries.
Transformer winding optical fiber temperature measurement device :
1. LCD display
2. Can be stored on-site
3. Equipped with a three proof box, made of 304 stainless steel/316 stainless steel
4. Wall mounted
5. Customizable
6.Appearance size:460*150*380mm
7.Installation size:380*360mm
7.The color of the box can be customized
1. LCD display
2. Can be stored on-site
3. Equipped with a three proof box, made of 304 stainless steel/316 stainless steel
4. Wall mounted
5. Customizable
6.Appearance size:460*150*380mm
7.Installation size:380*360mm
7.The color of the box can be customized
The flange ring is made of stainless steel 316 material,
which is used for welding to the inner wall of the transformer box,
and the flange is installed with screws.
Actual dimensions vary by project.
Product parameters
Diameter: 305mm (can be customized)
Thickness: 20mm (can be customized)
Material: 316 stainless steel
which is used for welding to the inner wall of the transformer box,
and the flange is installed with screws.
Actual dimensions vary by project.
Product parameters
Diameter: 305mm (can be customized)
Thickness: 20mm (can be customized)
Material: 316 stainless steel
The flange is made of stainless steel 316 material, which can be installed with 1-16 penetrators, and is equipped with O-shaped fluororubber ring. It is used to fix the penetrator, and is installed on the wall of the transformer oil tank in cooperation with the flange ring, and the sealing performance meets the national standard.
Flange plate parameters
Diameter: 305mm (can be customized)
Material: 316 stainless steel
Thickness: 12.7mm (can be customized)
Matching bolt: 8*M13
Through hole: 1~16 way customization
Flange plate parameters
Diameter: 305mm (can be customized)
Material: 316 stainless steel
Thickness: 12.7mm (can be customized)
Matching bolt: 8*M13
Through hole: 1~16 way customization
The penetrator is used as the transition between the internal optical fiber sensing probe of the oil-immersed transformer and the external transition optical fiber, and can withstand the transformer oil pressure to provide accurate and reliable measurement components.
Product parameters :
Temperature range: -40ºC~260ºC
Material: 316 stainless steel
External thread: M14x1.0
Hex head: S12
Connector type: ST
Withstand pressure: 150Kpa
O-ring seal: Fluorine rubber ring
Nut: M14x1.0
The protective cover is installed on the flange and is made of stainless steel 304. It is used to protect the feeder and the external optical fiber extension cable from damage. It is equipped with a sealing gasket to effectively prevent rain and water. The internal sealing gasket can reach IP55. The bottom outlet hole is 3xφ28, which can be installed with PG21 waterproof connector.
The protective cover material can be customized with 316 stainless steel, and the appearance spray color can be customized
The optical fiber sensing probe is made of rare earth materials. The optical fiber probe can be used safely in almost any environment, free from EMI, RF, MRI and microwave interference, withstand high voltage 100KV, small size, high temperature measurement accuracy, fast response speed, and stable performance and other characteristics
Product parameters
Temperature range: -40ºC~260ºC
Temperature measurement accuracy: ±1 ºC
Resolution: 0.1°C
Fiber Type: Polyimide
Fiber Jacket: PTFE
Connector type: ST
Fiber Length: Custom
Probe direct: 3.0mm
Probe direct: 3.0mm
The external fiber optic extension cable is used to connect the feeder and the transformer winding fiber optic temperature measurement device, which provides a very stable connection. The outer layer is covered with a 2.4 mm Teflon sheath for added protection, heat and chemical resistance. ST connectors with step-downs are used at both ends.The fiber is designed to be paired with feed-throughs for use in harsh environments without compromising performance.
Product parameters
Fiber jacket diameter: 2.4mm
Fiber Jacket: Teflon
Connector type: ST
Temperature range: -40ºC~260ºC
Fiber Length: Custom
- The payment term: We accept TT,30% deposit and 70% balance against copy of BL.
- The delivery time: Usually it will take about 15-20 days.
- The standard of package: Usually use strong plywood case for protection.
- The logo: lf you have good quantity, it absolute no problem to do OEM.
- 0ur market: our products are popular in Indonesia, Philippines, Russia, USA, Middle East and soon. Some of them are our regular customers and some of them are developing. We hope you canjoin us and make mutual benefit from our cooperation..
- Warranty: in 12 month since BL date.
- Quick response in before sales period help you got order.
- Excellent service in production time let you know each step we made.
- Reliable quality solve you after sale headache.
- Long period quality warranty ensure you can buy without hesitate.
1. One-stop supplier globally.2. More than 13 years professional experiences in electrical appliance industry.
3. We offer professional online technology support for perfecting your electrical solution free
4. Experienced sales service and suggestion.
5. All the products with accessories under strict quality control and final inspection before shipping.
6. We can assure the powerful competitive price and reliable quality products.
7. Most competitive shipping rate from our own shipping forwarder.
8. Warranty assurance: 12 month
9.Whatever big or small order, we can provide you one-to-one service!
