Audited Supplier
Ptfe powder DF203
Qfreon
Qfreon
Qfreon
Element Organic Polymer
White
MPa, ≥ 24
Synthetic Resin and Plastics
Long and Short Fiber.
High-Quality
99.99
PTFE Thread Seal Tape
327±5
QFREON
20kg
Zhejiang, China
3904610000
Product Description
ltem | unit | DF-203F |
Appearance | / | scrap metal, sand and other impurities cannot be mixed, with visible dark spots cannot exceed 2% |
Bulk Density,g/l | / | 475±100 |
Tensile strength,≥ | Mpa | 24 |
Elongation at break,≥ | % | 300 |
Relative density | / | 2.150-2.200 |
Moisture Content,%≤ | % | 0.030 |
Average Particle SIze | / | 400-575 |
Maximum compression ratio | / | 4001 |
Hot stress crack resistance | / | - - |
Polytetrafluoroethylen (PTFE), commonly known as "the king of plastics", is a polymer compound formed by the polymerization of tetrafluoroethylen. Insulation and good resistance to aging. Used as engineering plastics, can be made into PTFE tube, rod, tape, plate, film, etc. Generally used in corrosion-resistant pipes, containers, pumps, valves, radars, high-frequency communication equipment, and radio equipment with high performance requirements.
Processing method Molding
Main Application
The resin are mainly used as insulating film for electric, the products of thin wall, seal, gasket, club, panel, tube, axletree, seal ring, and loop etc
Package, transportation and storage
1). PTFE is packed in double layer PVC bags inside and in hard circular barrels outside.20kg/barrel. On the barrel, there should be attached label and quality certificate.
2). PTFE should be stored in clean dry warehouse to prevent from dust, moisture, etc, foreign maters.
3). The product are transported according to non-dangerousproducts.
Heat, moisture, freezing and strong shock should be avoided during transportation. Over-bumpiness and compression is adapt to make the resin bind together.
Processing method Molding
Main Application
The resin are mainly used as insulating film for electric, the products of thin wall, seal, gasket, club, panel, tube, axletree, seal ring, and loop etc
Package, transportation and storage
1). PTFE is packed in double layer PVC bags inside and in hard circular barrels outside.20kg/barrel. On the barrel, there should be attached label and quality certificate.
2). PTFE should be stored in clean dry warehouse to prevent from dust, moisture, etc, foreign maters.
3). The product are transported according to non-dangerousproducts.
Heat, moisture, freezing and strong shock should be avoided during transportation. Over-bumpiness and compression is adapt to make the resin bind together.
