Audited Supplier
Firstrate FST100-2005 RS485 24V DC pm10 PM2.5 Smart Air Quality Testing Monitor Sensor
| Product Introduction | |
| The FST100-2005 Smart Air Quality Testing Monitor Sensor is designed according to the laser scattering principle and is mainly used to detect the PM 2.5/PM10 particle content in the atmosphere. The product adopts high-sensitivity gas detection probe with stable signal, high precision, wide measuring range and long transmission distance. It is suitable for air quality environmental monitoring in factories, schools, commercial buildings, construction sites and other places. | |
| Product Features | |
♦ Laser scattering sensing technology, stable and reliable performance | |
| Applicable Range | |
♦ Meteorological, ropeway, ambient air quality monitoring | |
| Standard Range | |
| Testing Range: PM2.5 0-500ug/m3 PM10 0-1000ug/m3 | |
| Technical Index | |
| Communication mode:RS485 communication (Modbus protocol) | |
| Electrical connection:Direct Lead | |
| Output Signal | Digital output: RS485 (Modbus protocol) |
| Working Voltage | 10-30VDC |
| Power consumption | Digital signal maximum power consumption 0.4w |
| Parameter configuration | Configure via the 485 interface with the provided configuration software |
| Resolution | 1ug/m3 |
| Working Environment | -20-+60°C 0%RH-80%RH |
| Response speed | ≤90s |
| Preheat time | ≤2min |
| Device baud rate | 2400 4800 9600 for option, standard 4800 |
| Byte format | 8 bit data bit, 1 stop position, no parity |
| Communication address: defaults to 1 Support function:03 | |
Q: Are you manufacturer?
A: Yes, We are professional sensor manufacturer over 50 years! Our technical team has more than 20 engineers.
Q: Can you accept OEM service ?
A: Yes, we can put your company information and logo on our sensors.
Q: Can I be your distributor?
A: Yes, we are looking for distributors in oversea market.
Q: What is your lead time?
A: Normally 7-10days. For quantity above100pcs, need extra 3-5 working days.
Air Quality Testing Monitor Sensor
