Audited Supplier
fixer liquid
Liquid
20lx2
BAIYUN
2 Sets Per Carton
CE
China
37079010
Product Description
Developer Liquid / Fixer Liquid
Directions for Use
This product is a concentrate Kit suitable for automatic machine processing of normal medical x-ray films, computerized tomographic (CT) films etc, made by BYSH, Carestream, Fujifilm, Agfa and all other brands.
Specifications:
Developer Liquid
One carton include:
Component A 5LX2 Red Label
Component B 0.25LX2 Red Label
One carton to make 40 litres (20 litres x 2) Developer working solution.
Fixer Liquid
One carton include:
Component A 5LX2 Blue Label
Component B 0.65LX2 Blue Label
One carton to make 40 litres (20litres x 2) Fixer working solution.
Working Solution Preparation Program:
1. Add 15L pure water into the developer tank.
2. Add slowly the whole component A with gentle agitation.
3. Add slowly the component B with gentle agitation.
4. Ready for use after completely mixed.
The same procedure is used for preparing the fixer solution.
Attentions:
1. Never mix up any fixer with the developer.
2. All containers must be clean, need necessary protection devices.
3. The processing chemicals are irritant, need necessary protection devices.
4. The development temperature is normally 30-35 centigrade, should be set as required.
5. The shelf life of this product is 24 months.
6. Each unit packing is supplied for preparing 40L of working solutions for the development and fixing respectively.
Directions for Use
This product is a concentrate Kit suitable for automatic machine processing of normal medical x-ray films, computerized tomographic (CT) films etc, made by BYSH, Carestream, Fujifilm, Agfa and all other brands.
Specifications:
Developer Liquid
One carton include:
Component A 5LX2 Red Label
Component B 0.25LX2 Red Label
One carton to make 40 litres (20 litres x 2) Developer working solution.
Fixer Liquid
One carton include:
Component A 5LX2 Blue Label
Component B 0.65LX2 Blue Label
One carton to make 40 litres (20litres x 2) Fixer working solution.
Working Solution Preparation Program:
1. Add 15L pure water into the developer tank.
2. Add slowly the whole component A with gentle agitation.
3. Add slowly the component B with gentle agitation.
4. Ready for use after completely mixed.
The same procedure is used for preparing the fixer solution.
Attentions:
1. Never mix up any fixer with the developer.
2. All containers must be clean, need necessary protection devices.
3. The processing chemicals are irritant, need necessary protection devices.
4. The development temperature is normally 30-35 centigrade, should be set as required.
5. The shelf life of this product is 24 months.
6. Each unit packing is supplied for preparing 40L of working solutions for the development and fixing respectively.
