Audited Supplier
Ceramic infrared heater is made out of ceramics.
1. Radioactive properties: a maximum monochromatic radiation components reached 0.9, the normal total radiation rate is greater than 0.83.
2. Thermal response time: from room normal temperature to a constant value of the radiant panel surface temperatures less than 20 minutes.
3. Degeneration of hot and cold resistance: five alternating hot and cold test of no peeling, no cracking.
| Radiating temperature inhomogeneity | ≤ 15% |
| Power tolerance | The rated working voltage ≤ 5% |
| Cold insulation resistance | 500V megger> 2mΩ |
| Thermal insulation resistance | 500V megger> 0.5mΩ |
| Using life | > 3000 hours |
Features
1.Extremely high temperatures, limited largely by the maximum temperature of the emitter
2.Fast response time, on the order of 1-2 seconds Temperature gradients, especially on material webs with high heat input
3.Focused heated area relative to conductive and convective heating methods
4.Non-contact, thereby not disturbing the product as conductive or convective heating methods do
Applications
* PET perform heating in stretch blow molding machines
* Printing Ink drying in offset machines
* Screen-printing curing on T-shirts and textiles
* Powder coating curing
* Rubber coated drying
* Sterilizing/mirror coating drying in glass industries
* Paint baking
* Paper coating drying
* All type of lamination
* Preheating prior to embossing
Square/rectangle IR Ceramic heater( hollow type & flat type) | Model | Size | Voltage | Wattage | Max.Temperature |
| YS-101 | 60x60 mm | 120-440V | 100w-300w | 800°C |
| YS-102 | 122X122 mm | 120-440V | 150w-1000w | 800°C |
| YS-103 | 245x60 mm | 120-440V | 300w-1000w | 800°C |
| YS-104 | 245x80 mm | 120-440V | 300w-1000w | 800°C |
| YS-105 | 122x60mm | 120-440V | 200-600w | 800°C |
| YS-106 | 285x60mm | 120-440V | 300w-1000w | 800°C |
| YS-107 | 245x110mm | 120-440V | 300w-1000w | 800°C |
