Flat Line Common Mode Inductor Coils Sq151 Sq1918 Sq2418 Sq2820 Sq3324 Flat Wire Inductance

• FEATURES:
•  
• Rated voltage (V): 85 to 265V AC, 50/60Hz
• Turns ratio: n1: n2=1:1
• Insulation resistance: 100MΩ min at 500DC
• Temperature rise: 50°C max
• Replacement for:EE16,EE19,EE25,EF16,EF20,EF25,UU10.5, UU16,toroidal common mode inductors
• High current, small profile, high efficiency with High frequency skin effect of flat wire, unit current density can reach 1.5-2 times of round copper wire, and the volume will be 0.5-1.0 times smaller under the same condition
• Lower temperature coefficient, only around once layer winding, perfect efficiency of heat sink , the temperature raise is much lower than the toroidal inductor
• Interturn capacitance is smaller than toroidal core, high insulation strength and high reliability
• The closed magnetic core design
• Use the flat wire, improving the space factor
• Single phase winding, thereby dramatically reduce stray capacitance
• EMI suppression is excellent
• Fully automatic winding, neat line arrangement, no overlapping, high production efficiency, low labor
• Low magnetic flux leakage
• Easy to mount on PCB circuits
• High common mode impedance at high frequencies
• Recommended Soldering Profile: Wave Soldering
• Operating temperature: -40 ºC to +85 ºC

• APPLICATION:
• Personal Computer
• Switching power supply, Adapter and UPS
• Computer products
• DVD
• LED power supply
• LCD TV & Monitor Displays Power Boards
• Consumer Electric Products & Battery Charger, Printers
• CAN Bus
• Noise Filters
• Power Trains
• USB Data Line Filtering
• Input Filters of DC-DC Converters
• Suppression of common mode noise

Specification	Inductance MIN  1KHZ 0.25V	Dimensions (mm MAX)									Current(A)	Power(W)
		W	D	H	L	E	1#Base		2#Base		MAX	MAX
							PIN 1	PIN 2	PIN 1	PIN 2
SQ1515V15	>15mH	16	22	22	3.5	0.8	12.8	10	8	7	1.5	60
SQ1515V20	>20mH	16	22	22	3.5	0.8	12.8	10	8	7	1.2	60
SQ1515V25	>25mH	16	22	22	3.5	0.8	12.8	10	8	7	1.2	60
SQ1515H15	>15mH	18	22	14	3.5	0.8	16.8	12.8	-	-	1.5	60
SQ1515H20	>20mH	18	22	14	3.5	0.8	16.8	12.8	-	-	1.2	60
SQ1515H25	>25mH	18	22	14	3.5	0.8	16.8	12.8	-	-	1.2	60
SQ1615V15	>15mH	16	22	23	3.5	0.8	12.8	10	8	7	1.5	65
SQ1615V20	>20mH	16	22	23	3.5	0.8	12.8	10	8	7	1.2	65
SQ1615V25	>25mH	16	22	23	3.5	0.8	12.8	10	8	7	1.2	65
SQ1615H15	>15mH	18	22	14	3.5	0.8	16.8	12.8	-	-	1.5	65
SQ1615H20	>20mH	18	22	14	3.5	0.8	16.8	12.8	-	-	1.2	65
SQ1615H25	>25mH	18	22	14	3.5	0.8	16.8	12.8	-	-	1.2	65
SQ1918V12	>12mH	15	25	26	4	0.8	12.8	10	10	10	2.0	180
SQ1918V20	>20mH	15	25	26	4	0.8	12.8	10	10	10	1.5	180
SQ1918V30	>30mH	15	25	26	4	0.8	12.8	10	10	10	1.2	180
SQ1918H12	>12mH	22	24	13	4	0.8	16.8	15	-	-	2.0	180
SQ1918H20	>20mH	22	24	13	4	0.8	16.8	15	-	-	1.5	180
SQ1918H30	>30mH	22	24	13	4	0.8	16.8	15	-	-	1.2	180
SQ2418V12	>12mH	15	24	32	4	0.8	12.5	10	-	-	2.5	250
SQ2418V20	>20mH	15	24	32	4	0.8	12.5	10	-	-	1.8	250
SQ2418V30	>30mH	15	24	32	4	0.8	12.5	10	-	-	1.5	250
SQ2418H12	>12mH	22	26	15	4	0.8	16.8	15	-	-	2.5	250
SQ2418H20	>20mH	22	26	15	4	0.8	16.8	15	-	-	1.8	250
SQ2418H30	>30mH	22	26	15	4	0.8	16.8	15	-	-	1.5	250
SQ2724V07	>7mH	18	30	38	4	0.8	4 PINS		-	-	3.5	280
SQ2724V15	>15mH	18	30	38	4	0.8	4 PINS		-	-	2.5	280
SQ2724V20	>20mH	18	30	38	4	0.8	4 PINS		-	-	1.8	280
SQ2724H07	>7mH	25	31	18	4	0.8	16.8	16.8	-	-	3.5	280
SQ2724H15	>15mH	25	31	18	4	0.8	16.8	16.8	-	-	2.5	280
SQ2724H20	>20mH	25	31	18	4	0.8	16.8	16.8	-	-	1.8	280
SQ2820V07	>7mH	16	30	38	4	0.8	4 PINS		-	-	2.0	300
SQ2820V20	>20mH	16	30	38	4	0.8	4 PINS		-	-	2.5	300
SQ2820V30	>30mH	16	30	38	4	0.8	4 PINS		-	-	5.0	300
SQ2820H07	>7mH	28	35	18	4	0.8	16.8	16.8	-	-	2.0	300
SQ2820H20	>20mH	28	35	18	4	0.8	16.8	16.8	-	-	2.5	300
SQ2820H30	>30mH	28	35	18	4	0.8	16.8	16.8	-	-	5.0	300
SQ3126V081	>8mH	22	34	38	4	0.9	18	16	-	-	8.0	400
SQ3126V082	>8mH	22	34	38	4	0.9	18	16	-	-	5.0	400
SQ3126V10	>10mH	22	34	38	4	0.9	18	16	-	-	3.5	400
SQ3126V25	>25mH	22	34	38	4	0.9	18	16	-	-	3	400
SQ3126H081	>8mH	28	35	18	4	1.0	20	16.8	-	-	8.0	400
SQ3126H082	>8mH	28	35	18	4	1.0	20	16.8	-	-	5.0	400
SQ3126H10	>10mH	28	35	18	4	1.0	20	16.8	-	-	3.5	400
SQ3126H25	>25mH	28	35	18	4	1.0	20	16.8	-	-	3	400
SQ4391V12	>12mH	-	-	-	-	-	-	-	-	-	7	600
SQ4391H12	>12mH	28	45	16	4	1.0	39	21	-	-	7	600

DeChuang industry co.,ltd,we specilized in magnetic components,Have great advantages in quality, cost and lead time control.
Mean while,we are also confident with our 15 years international trade to support customers professionally.

The main products are: Common mode choke, Rod core choke, Air core choke, SMD power inductor, etc,our R&D capability is 
strong for designning together with customer for the new product.Have great advantages in quality, cost and lead time control.

Q1. How long is your delivery time?
A: Generally it takes 3-5 days for samples and 15-20 days after your order for massive production.

Q2: Can I get some samples?
A: Yes, 3-5 pcs free samples are available for your test. Small batches are also acceptable.

Q3: Is it OEM available?
A: Yes. We have rich experience and good ability to put your design and idea into real product, we can laser print your brand on
the products.

Q4: How about the lead time ?
A: We have a very professional team with high quality, usually we can ship within 30 days. But for details, please check exactly with us.

More questions, please contact us directly. We are always here waiting to serve you!