Flat Pack Office Container with Net and Electric Circuit (shs-fp-office038)

Description:
Our flat pack office container with net and electric circuit solution arrives in a standard container for loading and unloading off vessels in remote areas with limited port facilities. It comprises modules that can be joined in any configuration to provide apartments, houses or office accommodation as required. It is fast and easy to erect and is designed to meet the prevailing thermal, structural and environmental loads relevant to the region.

Features:
Flat pack design: Wall panel, door, corner post and accessories are packed between the roof and floor. Two to six container houses can be packed into the same dimension as international standard shipping container`s, meeting land transportation demand, thus reduce the cost of transportation by a large margin. Four containers can be packed into one bundle, same dimensions as a twenty foot container. Save the transport space above 70%. This packed method is especially suitable for nonstandard modular house;
Environmental, Efficient and Energy saving: Efficient heat and sound insulation, well sealing property, comparing with conventional residence save energy above 50%. The whole building material is recyclable.
Green and Healthy: Consist of healthy, environmental and secure material. Meet every building standard.
Low cost: High efficient manufacturing in factory contributes to low cost. Low energy consumption and maintenance, better than traditional residence on performance, using and quality.

Structure unit: Prefabricated parts, strong enough to resist the earthquake.

Combination: Prefab units can be combined side by side or end with tail, also can be stacked with each other (highest 4 floors). Thus can satisfy customer`s various sizes, shapes, and application demands.

Function Module: Accommodation-Living room, Bedroom, Dining hall, Kitchen room, Bathroom etc;
Office: -Reception, Meeting room, Office area, Administrative room, Financial room etc;
Commerce-Restaurant and pub, Shop, Kiosk and showroom etc;
Health-Hospital, Public toilet, Ablution, clinic, Mobile treatment room etc;
Education-Classroom, Dormitory, Toilet, Mess, Storeroom etc.
Load bearing capacity
Floor Load:

Ground floor: Max. Load capacity 2.0 kN/m²
Top floors: Max. Load capacity 1.5 kN/m²
Snow Load: Max. Load capacity 1.0 kN/m² (equates to a typical snow load on the ground of sk1.25 kN/m² (125 kg/m² )
According to EN1991-1-3 with the national application document B1991-1-3)
Wind Load: 90 km/h (25 m/s) - terrain category III. When wind speeds are higher than 90 km/h, additional safety measures on the cabins need to be carried out (anchoring, screwing). Such measurements are to be calculated by approved specialists taking into consideration local standards and conditions.
Sound Insulation: 33-44dB