Audited Supplier
SOLARSHINE C-series flat plate solar collector is special designed for high grade residential solar water heating systems, this solar collector is also suitable to be installed in any climate regions.
The collector is elegant-design with firm structure and manufactured by top quality materials.
Features:
1. The copper welding is very firm and thick, the joint of each welding point is perfectly integrated ensure no risk of leaking.
2. The black chrome selective absorber coating is very firm, it can bear high temperature under solar radiation without any risk of removing or fading.
3. The sealing is with 2 layers of EPDM rubber inside and outside of the glass cover, each corner of collector is made of silicon reinforcement sealing, no risk of outside water splashing into collector.
EPDM rubber is a perfect material of any sealing application, with good performance of anti-corrosive, anti- heated, flexible, long-life etc.
4. The frame casing is aluminum alloy, with 1.4mm wall thickness to ensure good-strength, the surface of frame casing is anti-corrosive electrophoresis, the frame can stand in outdoor condition without any deformation.
5. Back side insulation is aluminum + high density phenolic foam plate, this is one of the big feature and competitive point of our solar panel collector.
Specification data sheet:
| SERIES | C - Series |
| Model Number | C-2.0-78/ C-2.0-85 |
| Ext. Dimension(mm) | 2000 x 1000 x 78/85 |
| Gross / Aperture area | 2.0 / 1.83 (M2) |
| Absorber Coating | Selective black chrome coating |
| Optical Performance of absorber coating | Absorption: >95% Emission: <8% |
| Efficiency coefficients (Based on Aperture Area) | ŋa = 0.778 - 3.5Tm* |
| Absorber Material | All in one: Aluminum fin / L1940 X W950 x δ0.3mm |
| Risers tube | Copper TP2- L1886 x Ø10 x δ0.5mm |
| Riser quantity | 7PCS |
| Header Manifold | Ø22 / L1060 /δ0.6mm |
| Fluid Capacity | 1.6L |
| Frame Casing/ Wall Thickness | Aluminum alloy 6063/ δ1.4mm |
| Bottom Insulation and thermal conductivity | Layer 1: 20mm super-heat protection phenolic insulation board. Low thermal conductivity: 0.023w/m.k Layer2: 25mm fiberglass wool+alu foil cover Thermal conductivity: 0.034w/m.k |
| Back Sheet | 0.4mm aluminum (integrated with phenolic insulation board) |
| Glass Cover | 3.2mm tempered, low-iron patterned solar glass, transitivity >/= 92% |
| Sealing Profile | EPDM rubber stripe |
| Tested/Rated pressure | 1.2Mpa/0.6Mpa |
| Net. Weight (empty) | 34kg |
APPLICATIONS:
