Audited Supplier
YT-P50-B
24 Months
24 Months
Rubber
Cylindrical
Floating
D0.5-4.5m,L1-9m
Black
T/T, L/C
15 Days
CCS, ABS, Lr, BV, Dnv
Accept
1 PCS
Accept
Export Packing
Evergreen Maritime
Export Packing
D0.5-4.5m, L1-9m
Qingdao, China
40169400
Product Description
Pneumatic Rubber Fender with chain and tire jacket
Floating pneumatic rubber fenders shall consist of an out rubber, reinforcement synthetic-tire-cord layer, and inner rubber, vulcanized firmly.
The properties requirements of outer and inner rubber material of floating pneumatic rubber fenders comply with ISO 17357:2014.
ISO 17357-2:2014 Ships and marine technology - Floating pneumatic rubber fenders - Part 2: Low pressure
1. Outer Rubber Layer for Better Protection
The out rubber is used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound has sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
2. High-Quality Synthetic-tyre-cord Layer
The reinforcement synthetic-tire-cord layer strong enough to maintain the internal air pressure of the fender. The inner rubber layer seals the pressurized air inside the fender.
3. Safety Valve For Safer
Pneumatic Fenders of diameter 2500mm and larger shall be equipped with a safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally. Fender which is smaller than 2500mm in diameter, can be equipped with a safety valve if required.
4. Chain and Tire Net Pneumatic Rubber Fenders
The outside chain and tire net provide extra protection for the rubber fender body. It can be changed easily.
Floating pneumatic rubber fenders shall consist of an out rubber, reinforcement synthetic-tire-cord layer, and inner rubber, vulcanized firmly.
The properties requirements of outer and inner rubber material of floating pneumatic rubber fenders comply with ISO 17357:2014.
ISO 17357-2:2014 Ships and marine technology - Floating pneumatic rubber fenders - Part 2: Low pressure
1. Outer Rubber Layer for Better Protection
The out rubber is used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound has sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
2. High-Quality Synthetic-tyre-cord Layer
The reinforcement synthetic-tire-cord layer strong enough to maintain the internal air pressure of the fender. The inner rubber layer seals the pressurized air inside the fender.
3. Safety Valve For Safer
Pneumatic Fenders of diameter 2500mm and larger shall be equipped with a safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally. Fender which is smaller than 2500mm in diameter, can be equipped with a safety valve if required.
4. Chain and Tire Net Pneumatic Rubber Fenders
The outside chain and tire net provide extra protection for the rubber fender body. It can be changed easily.
