Audited Supplier
LHT-FM-01
20~25 Years
10 Years
GB, ISO, TUV
Commercial
HDPE or HDPE+Aluminum
Floating Mounting
60m/S
1.4kN/M2
Lake, River or Sea
10, 15 Degree or Other
Pontoon
Blue Dolphin
Standard Export Package
According to customer needs or company standard
Xiamen
Product Description
Product Information
solar floating mounting system is a device that generates electricity by floating photovoltaic modules on water. The stent is designed to improve the safety, power generation efficiency and environmental friendliness of photovoltaic power plants, while taking into account the special environment and conditions of the water body.
The design of the brackets should take into account water conditions, flood level, installation Angle and density of the photovoltaic module and other factors to ensure the safe operation and good performance of the power station.
Advantages:
Land conservation : established on the water, does not occupy land resources, can reduce the cost of land acquisition.
Increases power generation : water has a cooling effect on photovoltaic modules, which can inhibit the rise of the surface temperature of the components, so as to obtain higher power generation. According to the comparative analysis of the experiment of a large aquatic photovoltaic power station in Hyogo Prefecture, Japan, due to the cooling effect of the water surface, the power generation of the panels increased by about 14%.
Reduce evaporation and algae blooms : Covering the surface of the water with solar panels can theoretically reduce evaporation on the surface of the water and inhibit algae blooms in the water, which is conducive to the protection of water resources.
Technical Details
Product Show
solar floating mounting system is a device that generates electricity by floating photovoltaic modules on water. The stent is designed to improve the safety, power generation efficiency and environmental friendliness of photovoltaic power plants, while taking into account the special environment and conditions of the water body.
The design of the brackets should take into account water conditions, flood level, installation Angle and density of the photovoltaic module and other factors to ensure the safe operation and good performance of the power station.
Advantages:
Land conservation : established on the water, does not occupy land resources, can reduce the cost of land acquisition.
Increases power generation : water has a cooling effect on photovoltaic modules, which can inhibit the rise of the surface temperature of the components, so as to obtain higher power generation. According to the comparative analysis of the experiment of a large aquatic photovoltaic power station in Hyogo Prefecture, Japan, due to the cooling effect of the water surface, the power generation of the panels increased by about 14%.
Reduce evaporation and algae blooms : Covering the surface of the water with solar panels can theoretically reduce evaporation on the surface of the water and inhibit algae blooms in the water, which is conducive to the protection of water resources.
Technical Details
| Install site | On Water Surface (lake, reservoir, dam, pond, etc.) |
| Wave Height | ≤0.5m |
| Tilt Angle | 0~25° |
| Material: | HDPE |
| Warranty | 10 Years warranty & 25 Years Service Life |
Product Show
