Audited Supplier
10-30m
90000m3/h
Motor
Cast Iron
Single-stage Pump
Liquid Pumps
Electric
Electric Pump
Blade Pump
Submersible Pump, Clarified Water Pump, Sewage Pump, Slurry Pump
Mechanical Pump
Sewage Pumps
Wear Pump
Axial Flow Pump
Sinoflo
Export Wooden Case
cast iron, stainless steel
China
Product Description
Summarize of Flood Floating Effluent Submersible Water Transfer Sump Dewatering Pump
Installation of water flow Channel: in terms of recommended sample installation diagram
The form of water exit: flap valve or other ways
Installation ways: Floor fixed type, suspended type, floated type and diagnal installed type;
Max. Capacity: 90000m3/h
Max. Head: 20m
Motor of Flood Floating Effluent Submersible Water Transfer Sump Dewatering Pump
- Submersible motor
- Power Level: electrical performance conforms to GB756
- Protection level: IP68
- Voltage grade: ≤1300kw, voltage, 380v, 660v, 6000v, 10000V
- Insulation level: F
- Rated frequency: 50Hz/60Hz
There are two or three stages of mechanical seal. The first stage called carborundum (directly contact with water). The second and third stage called graphite and carborundum.
Leak proof Equipment of Flood Floating Effluent Submersible Water Transfer Sump Dewatering Pump
Sinoflo Axial/Mixed Flow Pump have been equipped with leak proof sensors. When the oil tank, the inner part of motor or the junction box has been leaked by water, the sensor will signal or made the motor shut down, and retain the malfunction signal.
Over heating protection system of Flood Floating Effluent Submersible Water Transfer Sump Dewatering Pump
A overheating protection device is fastened on the motor winding. When the temperature exceeds the stated value, the device will signal or made the motor shut down.
Rotation direction:
Seen from the top of the motor, the impeller is rotating clock wisely.
Application of Flood Floating Effluent Submersible Water Transfer Sump Dewatering Pump
Sinoflo axial/mixed flow pump is widely used in industry and agriculture water lifting, urban water supply, light polluted water discharge and other water transfer project.
Working condition of Flood Floating Effluent Submersible Water Transfer Sump Dewatering Pump
Clean water with the temperature no more than 50 or some liquids that are similar to water.
