Audited Supplier
HT-300-UTD-MIR
High Frequency Ultrasonic Sensor
Digital Type
Ceramics
High
Dual Probe
Air
Echo Reflection
IP67
RoHS
Customized
HTW
1300PCS Per Package
China
9031809090
Product Description
Appearance can be imitated, but quality can NEVER be imitated
| Parameter | Unit | Value |
| Installation height | KHz | 30±1mm |
| Driving frequency | KHz | 300±10kHz |
| Power-on delay | s | ≤30ms |
| The 2nd echo | V | ≥1.3V(1600) |
| Operating Voltage | VDC | 4.9~5.1 |
| Directivity | Deg | ≤12° |
| Working current | mA | ≤10mA |
| Interface Type(Default) | / | High and low level signal(3.3V) High level: ≥2.4V Low Level: ≤0.4V Max output current: 8mA Test frequency: ≤100Hz |
| Interface Type(Need to send command to switch to) | / | Communication mode: COM Data bit: 8 Bps: 115200 Check bit: None Stop bit: 1 |
| Connection | / | Connector: A1251H-4P/CJT with pin interval of 1.25mm |
| Precision | mm | ≤2mm |
| Shell material | -- | PC |
| Shell Color | -- | Black |
| Working temp. | ºC | 0~40ºC |
| The comparison of other models of floor material recognition sensor/transducer: | |||||
| Product | Output | Type | PCBA embedded | Algorism Pre-installed | Remark |
| HT-300PLT1612 | Analog signal | Transducer | NO | NO | Cheapest, R&D in algorism needed |
| HT-300PLT-A | Analog signal | Sensor | YES | NO | Cheaper, Signal amplified and filtered R&D in algorism needed |
| HT-300PLT-M | Digital signal (COM) | Sensor | YES | YES | Time-saving in algorism, directly set up the value for different floor materials to be able to differentiate |
| HT-300PLT-MIR | Digital signal (COM+I/O) | Sensor | YES | YES | Time-saving in algorism, the default mode is I/O, directly outputting the result for either hard or soft floor type, it can be switched to COM mode to set up threshold value for more floor material detection |
Contact us if you have questions or concerns, we are one of the top manufacturers focusing on piezo materials and ultrasonic sensors in China
