Audited Supplier
FG-VI
Provide Free Spare Parts
1 Year
ISO9001
PVDF
Water-Cooling
Oxygen
50-60Hz
Portable
Electrolytic Type
1/2 Inch
94mm
0.35W
PVDF
0.2-1m3/H
2-4kg/Cm2
4-7 Nm3/Hr
Black
FG
Carton Case
1/4' 1/2' 3/4' 1' 1.5' 2'
China
7307990000
Product Description
Flygoo 1/2'' Venturi Ejector for Pool Ozone Water Mixture
The PVDF venturi injector is designed to be used with an ozone generator for water treatment. It is excellent for ozone mass transfer. Molded PVDF & rugged construction ensure years of life. The ozone suction port quickly transfers ozone gas into water stream under pressure.
What is a Venturi Injector?
Widely used for the injection of air, oxygen, and ozone. Also compatible with liquids. Tests have shown that when installed properly, injectors can transfer ozone into water with efficiencies as high as 99%.
The ozone venturi injector is made of three parts, which is tressurized pipe, the suction chamber, and the nozzle. It is a gas water hybrid approach which use the venturi principle. The ozone venture produce the negative pressure which use the high-speed water flow the throat of the mixing tube, cause the vacuum state of the suction chamber, under the influence of the pressure difference, the input-gas is sucked to the mixing tube.
The water is stir strongly, gas is smashed to the small air bubble, turn into Gas-water emulsion of the mist, finally, be erupt through the spread port of the mixing tube, in continued, begain the Vortex stirring in the next tube, make the gas dissolve in the water.
The ozone venturi injector is made of three parts, which is tressurized pipe, the suction chamber, and the nozzle. It is a gas water hybrid approach which use the venturi principle. The ozone venture produce the negative pressure which use the high-speed water flow the throat of the mixing tube, cause the vacuum state of the suction chamber, under the influence of the pressure difference, the input-gas is sucked to the mixing tube.
The water is stir strongly, gas is smashed to the small air bubble, turn into Gas-water emulsion of the mist, finally, be erupt through the spread port of the mixing tube, in continued, begain the Vortex stirring in the next tube, make the gas dissolve in the water.
| Items/Models | A12057 | A25100 | A25152 | A32235 | A48275 | A58295 |
| Length (mm) | 57 | 94 | 150 | 230 | 275 | 290 |
OD of Water Inlet and Outlet | 1/4'' | 1/2'' | 3/4'' | 1'' | 1.5'' | 2'' |
OD of Air Inlet | 1/8'' | 1/4'' | 1/4'' | 1/2'' | 1/2'' | 1/2'' |
Power of water pump (KW) | / | 0.35 | 0.55 | 0.75 | 1.5 | 2.2 |
Input pressure (kg/cm2) | 2-3 | 2-4 | 2-5 | 2-5 | 2-6 | 2-6 |
Output pressure (kg/cm2) | 0-1 | 0-1 | 0-1 | 0-1 | 0-1 | 0-1 |
Air suction capacity (Nm3/hr) | 0.3-0.5 | 4-7 | 7.5-10 | 11-15 | 22-30 | 37-49 |
Dissolved oxygen (kgO2/hr) | 0.1-0.3 | 0.3-0.5 | 0.5-0.7 | 0.8-1.1 | 1.6-2.2 | 2.7-3.5 |
Water flow (m³/h) | 0.05-0.25 | 0.2-1 | 1-3 | 3-10 | 10-25 | 25-50 |
Ozone Generator Features:
1. Innovative Venturi design Innovative design of convergent, throat and divergent sections of Venturi for more injection rate.
2. Additional Valve Provided Additional Valve provided for suction side to prevent reverse flow of water.
3. Additional Fine Suction Filter To avoid entry of solid particles in system, additional suction filter is provided.
4. Various Option Available Venturies are available from ½", ¾", 1", 1¼", 1½", 2"
5. Made of engineering plastic.
6. Excellent chemical resistance to most of the chemicals.
7. Highly efficient and compact differential pressure injection device.
8. Economical and low cost option.
9.Available in ¾", 1", 1¼", 1½" and 2" BSP inlet / outlet connection. Any other size can be supplied on demand.
