Fnirsi Ctg-20 Car Inspection Paint Gauge, Oil Paint Surface Tester, Coating Thickness Gauge

This product is a coating thickness gauge used to measure thethickness of electroplated coatings or coatings on metalsurfaces. lt has the ability to measure the thickness of nonmagnetic coating (such as paint) on magnetic materials suchas steel/iron, as well as the thickness of coating (such as paint)on non magnetic materials such as aluminum. Built inprecision probe, lithium battery charging. Automaticallydetect substrate properties and detect coating thicknessthrough electromagnetic induction and eddy current effects.This instrument can non-destructive measure the thickness ofthe coating, with fast speed and high accuracy. Widely used inmanufacturing, chemical industry, automotive and othertesting fields.
 

Please Note:

·The curvature of the substrate to be tested is too steep.

·The area of the substrate to be tested is too small.

·The surface of the substrate to be tested is rough.

·There is a strong magnetic field nearby.

·The ambient temperature/humidity changes significantly.

·Insufficient battery, please charge in time.
 

1.Product Model:CTG-20

2.Measuring Range:0-1400μm

3.Accuracy:±3%+2μm

4.Resolution Ratio:0.1μm

5.Calibration:Zero point calibration;Multi-point calibration

6.Unit:μm,mil

7.Mini Convex Curvature Radius:5mm

8.Mini Concave Curvature Radius:25mm

9.Mini Measurement Area Diameter:20mm

10.Work Environment:No strong magnetic field

11.Work Temperature:-10 ºC -+50 ºC

12.Humidity:20% -90% RH

13.Battery:600mAh Lithium battery

14.Size:115 x 48 x 18mm

15.Weight:About 83g

16.Data storage: Support

17.Putty powder test: Support

18.Rotatable screen: Support

19.Auto Power Off: Support
 

1.CTG-20 coating thicknes gauge

2.Ferrous calibration substrate

3.Non-Ferrous calibration substrate

4.50/100/250/500/1000μm calibration sheet

5.USB data cable

6.User manual