Audited Supplier
Nickel 718
ANSI, DIN, JIS
Welding Flange
Stainless Steel
Round
Welding
FM
Forging
BaiDe
Pallets
DIN, ANSI
Yancheng, Jiangsu
7307210000
Product Description
FLANGE
Application:For seal or connect of pipe/tub-e lines
Material:304,304L,316,316L,nickel alloyother material on request
Standard:ANSI,DIN,JIS,BS,EN1092-1
Size:DN15 (1/2") to DN5000 (200")
Type:Threaded Flanges, Socket Welding Flanges, Blind Flanges, Other Flanges
| Preferred for high-pressure, subzero or elevated temperature |
| Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion |
| Easily radiographed and provides excellent stress distribution |
Slip-on
| Not normally used in high-stress applications due to low hub and weld attachment |
| Silps over outside of pipe |
| Inside of flange welded at hub and end of pipe |
Lap joint
| Used where bolt alignment or access for cleaning is required |
| Similar to slip-on flange when used with lap joint stub end |
| Radius at intersection of flange face and bore to match lap joint stub end |
Threaded
| Used where welding would would be hazardous |
| Designed for low-pressure and non-cyclic applications |
| Bore is threaded to match pipe thread |
| Tapered to seal pipe and flanges |
Socket welding
| For small-diameter chemical processes, hydraulic and stream distribution lines |
| Similar to slip-on flange |
| Counter bore matches pipe bore, allowing unrestricted flow |
| Counter bore from hub side fits pipe's outer diameter - can insert pipe in socket with fillet weld at hub |
Blind
| Used to close ends of piping |
| Has no bore |
| Permits access to sealed lines |
Other flanges
Orifice, Expander, Reducing, Lightweight, Studding Outlets, Long Weld Necks,Metric, Navy Drawings, Customer Drawings
Q: Are you factory ?A: Yes,We are the factory with more than 30 years of production experience.
Q: How long is your delivery time?
A: For orders of one to five cases, the delivery time is generally around 20-30 days.it is according to order quantity.
Q: Do you provide samples ? Is it free or extra ?
A: Yes.We can provide free samples for standard fasteners, But the clients will pay the Express charges.
Q: What is your terms of payment ?
A: Small order 100% in advance.
B: Normally 30% T/T in advance,70% balance after BL copy.
C: or we discuss the details.
Q:Do you support the customization?
A:Yes,we can produce according to the drawing or samples.
Q:How about the quality of your products?
A: The company has advanced production and testing equipment. Every product will be 100% inspected by our QC department before shipment.
