Audited Supplier
Forging and machining sprocket wheel
About our products
1.Name: Forging and machining sprocket wheel
2.Material: Steel alloy
3.Surface Treatment : Anti-rust Oil
4.Packaging: Euro-standard Veneer Case of 1200mm×800mm×900mm
5.Process:forged,sandblasting,packaging,delivery
6.This series has three products,one up arm and two dowm arm,you can find them in the product list.
7.This is one of the down arm.
8.Most of our products made of carbon steel,like 1035,1045,35CrMo,42CrMo,40Cr,etc.
9.Also can follow your info,made by stainlee steel,and other special materials.
Hope good cooperation with you.
Close die forging | |
1) Suitable for: | big bath & medium size |
2) Commonly used materials | 1) Wind power shaft:42CrMo4V, 34CrNiMo6,Wind power flange: S355, C22, 16Mn, 20Mn, 42CrMo, F304 2) Forged pipe fittings: SA106 CL B, SA 106 CL C, WB36, 12Cr1MoV, SA 335 P11, P12, P22, P91, SA182 Gr. F1, Gr. F5, Gr. F11 CL2, Gr. F12 CL2, Gr. F22 CL3, SA350 Gr. LF1, Gr. LF2, Gr. LF3, 3) Pressure vessel forgings: SA105, SA350 LF2, 16Mn, 20MnMo, 15MnMo, 12Cr2Mo1, 14Cr1Mo, F304, F316,17-4PH 4) Shaft related forgings: 25CrMo4, 42CrMo4, 40CrNiMo, 34CrNi3Mo, 25Cr2Ni4MoV, 18CrNiMo5, 30CrMo, 4130,4140 5) Gear related forgings:35CrMo, 34CrMo4, 4137, 42CrMo, 4140, SCM440, 20CrMnMo, 40CrNiMo, 20CrNi2Mo, 20Cr2Ni4A, 34CrNi3Mo |
3) Industry involved: | Automotive industry/Engineering/. |
4) Part overall dimension limit: | max 4000tons |
5) Representative product: | Auto connecting rods/Steering engines/Gears/Driving shafts/Vehicle axles |
6) Manufacturer Certification: | ISO9001 (2000)/TS16949 |
7)feature | Precision forging hammers range from 160 tons till 4000 tons -Precision CNC machining centers for further machining process -Induction furnace for raw material heating -Heat treatment of continuous quench + temper +carburization available
|
8)Annual forging capacit | 8000tons |
9)the unit weight of forgings | range from 0.1kg/pc till 200kg/pc |
10)Mold development ability | According to the customer's drawing or sample. |
We has engaged in this area for long time, thus, choose us is you best choice. This forging parts main process involved in:
1. Analysis from it function & whole craft
2. Designing its craft
3. Make sure its machining style
4. Make out the form of the blank for machining
5. Rough machining process
6. Precision machining
7. Firstly treating the main face(basic surface) then minor face(other face); Face first, hole as followed.
Contact us or visit us for more information, if you want.
Materials
Ferrous Alloys
Low Carbon Steel (Grade # EN 1A, SAE 1020, SAE 1010 etc.)
Medium Carbon Steel (Grade # EN 8, EN 31, EN 9, SAE 1045 etc.)
High Alloy Steel (Grade # 16MnCr5, 20MnCr5, EN 19, EN 24 etc.)
Stainless Steel (Grade # SS 304, SS 310, SS 316 etc..)
Non Ferrous Alloys
And as per customer specified materials in ASTM, DIN, BS, IS, JIS standards
Technical Parameters
Capacity: 5000 Tons/Year
Testing Facility: Chemical, Mechanical, NDT, Hydro, Hardness, Micro Structure and General Inspection
Surface treatment: Nickel Plating. Chrome Plating, Powder Coating, Paint etc
