Audited Supplier
After the installation is completed, the rotary tiller should first be tested, and in the process of testing the installation of the rotary tiller for further inspection, the focus needs to check whether the rotary tiller blade is installed incorrectly, the bolt and the lock pin of the universal joint are installed firmly, once the problem is found, it needs to be handled in time, when the installation of the rotary tiller is confirmed that there is no problem, the rotary tiller should be lifted slightly off the ground. Engage the power to make the rotary tiller rotate at low speed, and observe whether each part of the rotary tiller is in normal working state. If it is chain drive, it is also necessary to pay attention to the operation of the chain
| Power: Diesel/gasoline engine |
| Tillage width: 800mm |
| tilling depth:80cm |
| Orchard soil raiser |
1. Ensure the safe use of machinery:
To ensure that the various parts and joints of the rotary tiller are not corroded or loose, while checking whether the cutter part is complete and sharp, to ensure the normal operation and safe use of the machine.
2. Preparatory work:
Before using the rotary tiller, it is necessary to clean the weeds and straw in the field, so as not to cause the machinery to get stuck or damaged. The operation depth and width of the rotary tiller should be adjusted to the appropriate position, and adjusted according to the specific soil conditions and crop needs.
Multifunctional wheat fertilizer seeder
