FTDI TTL-234X-3V3

Smart Cable Assembly, USB to UART Converter, 3Mbaud, SIP 6 Pin Connector, FT234XD Chip, 1.8m/5.9ft
The TTL-234X cables are a family of USB to TTL serial UART converter cables incorporating FTDI's FT234XD USB to basic UART interface IC device which handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB.
Typical Applications
USB to Serial TTL Level Converter
Upgrading Legacy Peripherals to USB
Interface Microcontroller UART or I/O to USB
Interface FPGA / PLD to USB
Firmware download and debug cable
USB Instrumentation PC interface
USB Industrial Control
USB Software / Hardware Encryption Dongles
"Maker" projects test cable

 

Part No: TTL-234X-3V3/ TTL-234X-5V

•  Data Rates: 3MBaud
•  
•  USB Speed: Full Speed (12Mbps)
•  
•  Interfaces: UART
•  
•  USB Connector: Type A
•  
•  End Connector: 6 pin SIL, 0.1" pitch
•  
•  Cable Length: 1.8m
•  
•  Cable Details: 6 core, 5mm UL2464 24 AWG
•  
•  Packages: N/A
•  
•  Channels: 1
•  
•  I/O Voltage: 3.3V
•  
•  USB Class: FTDI Drivers
•  
•  Virtual Com Port: Yes
•  
•  Max Power Output: +5V / 450mA
•  
•  FTDI Internal IC: FT234X
•  
•  Operating Temperature: -40°C to +85°C

The TTL-234X-3V3 is a USB to Serial (TTL level) converter cable which allows for a simple way to connect TTL interface units to USB. This version of FTDI's USB to TTL serial adapter cables has it's I/O pins configured to operate at 3.3V levels.

The TTL-234X-3V3 uses a FT234X IC which is housed inside the USB 'A' connector, and is terminated at the end of a 1.8 meter cable with a 0.1″" pitch header socket which provided access to transmit (Tx), receive (Rx), RTS#, and CTS#. These lines all operate at 3.3V levels. Also brought out on the header are Vcc (5V), and GND.

The TTL-234X-3V3 is fully RoHS compliant and is supplied loose - packed in an anti-static bag. It is FCC, CE   approved.